Oki MB290 User Manual

Also see for MB290: Service manual Quick start guide

Contents

Oki MB290 User Manual Manual pdf 36 page image

MB290- 36 -Parameters/SetupEconomy periodThis function allows you to defer a fax transmission to "off-peak hours" and thus reduce the cost of yourcommunications.The economy period, via the telephone network (at off-peak hours), is preset by default from 7.00 pm to 7.30 am.Nevertheless you may change this time slot.To modify the economy period:!233 - SETUP / SEND / ECO PER.1 Press !, enter 233 using the keypad.2 Enter the hours of the new economy period (forexample 19:00-07:30) and confirm your choicewith OK.3 To exit this menu, press .To use the economy period:!32 - FAX / ECO TRANS.1 Select !32 - FAX / ECO TRANS.2 Enter the call number and confirm with OK.3 Adjust the contrast and confirm with OK.4 Select the feed type, FEEDER or MEMORY andconfirm with OK.5 You may enter the number of pages beforetransmission and confirm with OK.6 If you are using the flatbed scanner, you can scanmore than one page. Place the next page on thescanner, select NEXT and confirm with OK. SelectDONE when all pages have been scanned.Reception ModeThis function enables you, if you have an external device(telephone, answering machine) plugged in to the EXTsocket on your terminal, or to the telephone plug adapter,to select the device receiving faxes and/or voicemessages.You may choose between the following reception modes :• MANUAL : the terminal does not receive anydocuments automatically. When you answer yourtelephone and realise that you are receiving a fax, youshould press the button on the terminal to receivethe fax.• FAX : the Fax reception mode is launched on theterminal systematically.• FAX-ANSWER. : the terminal handles reception of faxmessages automatically, the external device handlesreception of telephone communications automatically.Press the #0 buttons on your telephone to cancel faxdetection.To set the reception mode:!241 - SETUP / RECEPTION / MODE1 Press !, enter 241 using the keypad.2 Select the required option and confirm with OK.3 To exit this menu, press .Reception without paperYour fax offers you the possibility to either accept orrefuse document reception if your printer is unavailable(no paper...).If your fax printer is unavailable, you may choose betweentwo modes of reception:• reception mode WITHOUT PAPER, your fax savesthe incoming messages in the memory,• reception mode WITH PAPER, your fax refuses allincoming subscribers.To select the reception mode:!242 - SETUP / RECEPTION / REC. PAPER1 Press !, enter 242 using the keypad.2 Select the option WITH PAPER or WITHOUTPAPER and confirm your choice with OK.3 To exit this menu, press .Number of copiesYou may print incoming documents more than once (1 to99).To set the number of each document received:!243 - SETUP / RECEPTION / NBR OF COPIES1 Press !, enter 243 using the keypad.2 Enter the wanted number of copies and confirmwith OK.3 To exit this menu, press .At each document reception, your fax will print thenumber of copies requested.ImportantIf you have connected a telephone tothe EXT socket on your terminal orto a telephone plug adaptor, werecommend that you set thereception mode to MANUAL.When you receive a call, you pick upusing this telephone and you hearthe particular fax tone. You can:- press the button on yourterminal or buttons #7 on yourtelephone to receive the fax.ImportantPaper out is indicated by a beep anda message on the screen.Received faxes are then stored inmemory (icon flashing) to beprinted as soon as you add paperinto the feeder.