Oki MB290 User Manual

Also see for MB290: Service manual Quick start guide

Contents

Oki MB290 User Manual Manual pdf 68 page image

MB290- 68 -PC FeaturesFrom this screen you can monitor the information orconfigure your multifunction machine from the tabs:• D EVICE SELECTION: Displays the list of devicesmanaged by the PC.• C OMPANION: Presents the multifunction machinescreen.• C ONSUMABLES: Displays the consumables status.• LINKS: Displays links to the machine parameters andaddress book.Device managementThis tab shows the list of devices managed by the PC.Adding a device connected via USBMake sure that your multifunction machine is powered off.The connection between the PC and the machinerequires a USB 2.0 shielded cable no more than 3 meterslong.1 Locate your USB cable connectors and connect asshown below on the picture.2 Power on your multifunction machine.The PC detects the device and the drivers areautomatically installed.3 Once the installation is finished, a messageindicates that the drivers are installed correctly.You can now use the multifunction machine to print orscan your documents.Adding a device connected to the networkYou may connect your multifunction terminal to anEthernet or a wireless network.1 Run the Companion Monitor application by clickingon the icon located on your desktop or from themenu S TART > A LL P ROGRAMS > OKIDATA >C OMPANION SUITE PRO LL2 > C OMPANION -MONITOR.2 Click the plus sign or A DD button.3 The list of devices detected on the networkappears. Click on R EFRESH to update the list.Detected devices appear with the followinginformation:4 NetBIOS name (hardware identifier) or IP address(device’s identifier on the network).5 Network name (user-defined). To define the nameof a device on the local network, refer to paragraphNetwork features, page 49.6 Select your multifunction machine and click OK.ImportantThe Companion Suite Pro softwareshall be installed to perform thisoperation.ImportantThe Companion Suite Pro softwareshall be installed to perform thisoperation.ImportantOnly devices found on the samelocal subnetwork as the PC areautomatically detected anddisplayed. To add a device locatedon another subnetwork, refer toparagraph Adding manually adevice connected to the network,page 69.