Oki MB290 User Manual

Also see for MB290: Service manual Quick start guide

Contents

Oki MB290 User Manual Manual pdf 37 page image

MB290- 37 -Parameters/SetupFax or PC receptionThis menu, combined with a software program installedon your PC will enable you to select the machine you wishto receive the documents on:• fax,• PC,• PC if available, fax otherwise.To select the reception mode:!244 - SETUP / RECEPTION / PC RECEPT.For more details, please refer to Fax communications,page 76 in chapter PC Features.To select the PC that will receive the documents:!247 - SETUP / RECEPTION / RECIPIENT PC1 Press !, enter 247 using the keypad.2 Select the recipient PC and confirm with OK.3 To exit this menu, press .When a fax is received on the machine, it is transmitted tothe recipient PC and a reception report is printed on thedefault printer of the PC.PC de-registeringThis menu lets you delete one or more PCs connected tothe terminal via LAN/WLAN (see Device management,page 68).!274 - SETUP / LAN ETHER / PC UNREG.1 With ! or ", select the PC that you want to delete,then validate with OK.Fax Server configurationThis function enables you, if you have a fax server, toselect the way fax transmission is handled by themachine: direct transmission over the telephone line ortransmission to the fax server over the local network.Configuring Fax server network parameters!834 - ADVANCED FCT / FAX SERVER / SRV-FAX NA1 Enter an identification E-mail address for yourmachine (refer to the administrator of the fax serverto obtain this address) and press OK to confirm.!835 - ADVANCED FCT / FAX SERVER / IP ADDRESS2 Enter the IP address of the fax server and pressOK to confirm.!836 - ADVANCED FCT / FAX SERVER / DOMAINNAME3 Enter the domain name of the fax server and pressOK to confirm.Configuring fax server function!831 - ADVANCED FCT / FAX SERVER / CONNEC.TYPE1 With ! or ", select your option from the tablebelow:2 Press OK to confirm.Selecting the access mode!832 - ADVANCED FCT / FAX SERVER / ACCESSMODE1 With ! or ", select your option from the tablebelow:2 Press OK to confirm.Lock the Fax server settingsThis function prevents access to all the Fax serversettings of menu ! 83 - ADVANCED FCT / FAXSERVER.Before that you have to enter a lock code.!8331 - ADVANCED FCT / SERVER FAX / LOCK /LOCKING CODE1 Press !, enter 8331 using the keypad.2 Enter your lock code (4 digits) with the keyboard,NoteThis menu only appears if a PC isregistered on the machine via the localnetwork (see Device management,page 68).Parameter SignificationD ISABLED The machine sends directlydocuments over the telephone line.D IRECT The machine sends documents tothe fax server over the local network.Parameter SignificationFAX SERVERONLYAll documents sent from the machineare transmitted to the fax server overthe local network.TELEPHONENETWORKONLYAll documents sent from the machineare transmitted over the telephonenetwork.AUTOMATICDocuments are transmitted to the faxserver over the local network. Iftransmission fails, they are thentransmitted over the telephonenetwork.