45641001TH Rev.1 8-15 /Oki Data CONFIDENTIAL8.3.2 Update procedureImportant:• The file system of USB device should be formatted in the FAT or FAT32 format. Be carefulsince the devices formatted in NTFS or other format will not be able to be operated. Thefile system can be confirmed on the device properties in applications such as Explorer ofWindows.• Never shut down the equipment during the update. Firmware data and the following optiondata (if installed) could be damaged and may not be able to be operated properly.- Data Overwrite Enabler (GP-1070)- Meta Scan Enabler (GS-1010)- External Interface Enabler (GS-1020)- IPSec Enabler (GP-1080)- Unicode Font Enabler (GS-1007)[a] Update procedure(1) Connect the USB device to the PC and write the model specific folder in which thedata file is stored.Store the data file for updating in the model specific folder.(2) Press the [ON/OFF] button on the control panel to shut down the equipment.(3) Connect the USB device [1] to the USB port [2] on the right upper cover.[2][1]Fig.8-10(4) Press the [ON/OFF] button while simultaneously holding down the [4] and [9] buttons.Data in the USB device are checked and the checking status is displayed on thescreen.
