45641001TH Rev.1 3-20 /Oki Data CONFIDENTIAL3.10.3 Functions[a] 1. Revert factory initial status HDDSelect this to dispose of the ADI-HDD as well as the equipment.When this item is selected, all data in the HDD are deleted and the HDD is reverted to itsinitial status at the factory shipment.This operation requires only a few seconds; however, you must create the partition in theHDD in the 3C mode (Format HDD) and reinstall the HDD data in the 49 mode to make theHDD reusable.When “1” is selected and then [START] button is pressed, the menu below appears. To start,press the [START] button.HDD Assist ModeCurrent HDD type: ADI HDDSelect number (1-2) and press START key1. Revert factory initial status HDD2. Remove keySystem Firmware VersionUpdate Mode: xxxx(x.x.x.x): 4c Mode=>Confirmation ScreenAre you sure ???Press START to continuePress STOP to cancelFig. 3-10When the operation is finished, the result appears on the menu.HDD Assist ModeCurrent HDD type: ADI HDDSelect number (1-2) and press START key1. Revert factory initial status HDD2. Remove keySystem Firmware VersionUpdate Mode: xxxx(x.x.x.x): 4c Mode=>Data in the HDD has been complately erased.Press SoftPower Key to Switch OffFig.5-1Note:If the equipment is started in the normal mode with this condition, an HDD mounting erroroccurs.
