|
45641001TH Rev.1 4-18 /Oki Data CONFIDENTIAL4.4.7 Fine adjustment of black densityThe density of black side on scanned image is adjusted at color-scanning. Mode (05)>Code Original mode Remarks8314 Text/Photo The larger the value is, the black side of the image becomesdarker.Acceptable values: 0 to 4 (Default: 1)8315 Text The larger the value is, the black side of the image becomesdarker.Acceptable values: 0 to 4 (Default: 0)8316 Photo8371 Custom modeNotes:Be careful for the value not to be too large since the gradation is reproduced worse in darker side.(1) While pressing [0] and [5] simultaneously, turn the power ON.(2) Key in the codes and press the [START] button.(3) Key in the adjustment values. Acceptable values: 0 to 4. (To correct the value once keyed in,press the [CLEAR] button.)(4) Press the [OK] or [INTERRUPT] button to store the value in memory. → The equipmentgoes back to the ready state.(5) Let the equipment restart and perform the scanning job.(6) If the desired image has not been attained, repeat step (1) to (5).4.4.8 RGB conversion method selectionThe color space conversion method of image is decided at color-scanning. Mode (05)>Code Original mode Remarks8319 Text/Photo 0: sRGB, 1: AppleRGB, 2: ROMMRGB, 3: AdobeRGB(Default: 0)8320 Text8321 Photo8372 Custom mode(1) While pressing [0] and [5] simultaneously, turn the power ON.(2) Key in the codes and press the [START] button.(3) Key in the adjustment values. Acceptable values: 0 to 3. (To correct the value once keyed in,press the [CLEAR] button.)(4) Press the [OK] or [INTERRUPT] button to store the value in memory. → The equipmentgoes back to the ready state.(5) Let the equipment restart and perform the scanning job.(6) If the desired image has not been attained, repeat step (1) to (5).
|
