45641001TH Rev.1 5-4 /Oki Data CONFIDENTIAL5.2 Error Code ListThe following error codes is displayed at the upper right of the screen when the “CLEAR PAPER”or “CALL SERVICE” symbol is blinking.Notes:For the error codes not described in this guide, refer to the Hardware Guide.5.2.1 JamError code Classification Contents TroubleshootingEA10 Finisher jam Paper not detected: Paper was not detected at thefinisher within the set period after the paper was fedby the main unit.P. 5-28EA20 Early arrival jam: A piece of paper is fed and thenthe next piece of paper is fed at an interval shorterthan the specified time.P. 5-28EA26 Paper transport jam (stop command request):Main unit requested finisher to stop operating whilefinisher was feeding paper.P. 5-29EA2A Paper transport jam (Between entrance transportand exit transport): Leading edge of paper in finishertransport path passed entrance transport sensor, butdid not arrive at exit transport sensor.P. 5-29EA2B Paper transport jam (Exit transport sensor): Paperstayed for longer than set period at exit transportsensor while being transported in finisher transportpath.P. 5-30EA31 Power-ON jam: Paper was detected at either theentrance transport sensor or the exit transportsensor while the power was on and the finisher’sside cover was closed.P. 5-30EA40 Side cover open jam: Jam occurred becausefinisher’s side cover was opened while finisher wastransporting paper.P. 5-31EA50 Stapling jam: Staple jam occurred at stapler. P. 5-31
