Oki Microline 8810 User Manual

Also see for ML8810: Setup guide Installation instructions Brochure Safety & warranty Hardware installation instructions

Contents

Microline 8810 Userís Guide15Quick Reference: Control Panel FunctionsNote Unless otherwise specified, these instructions assume that theprinter is selected (on line).Enter the Menu1. Press SEL.2. Press both the MODE and theSHIFT switches simultaneously.Print the Menu1. With the printer in the ManualMode, turn it off.2. Press and hold SELECT andMODE while turning the printeron.3. When prompted, load a sheetof paper (minimum letter orA4) on the platform.Change Print ModesWith the printer on line:1. Press FF to engage the Quietprint mode.2. Press LF to engage the Normalprint mode.Change the Printhead Gap1. Press SEL.2. Press and hold the SHIFTswitch, then press the LOADswitch repeatedly to scrollthrough the various settings forthe printhead gap.3. Press SELChange Paper Paths1. Press SEL.2. Press MODE repeatedly tochange the paper path.The printer automaticallyreinitializes in the new path.Move Continuous Forms tothe Print Position1. Press SEL.2. Press FF.Park Continuous Forms1. Press SEL.2. Press LOAD.Move Continuous Forms tothe Tear Off PositionNote Form Tear Off must beactivated. See page 75.1. Press SHIFT to movecontinuous forms up to the tearoff position.Change Align x Setting1. Press SEL.2. Press and hold the MODEswitch, then press the SHIFTswitch repeatedly to selectAlign 1, Align 2, Align 3, orAlign 4