Microline 8810 Userís Guide49Explanation of Menu ItemsThe menu items are listed in alphabetical order.For a summary of the menu groups, items and settings, see ìMenuSummaryî on page 33.1stDotAdjAlignNote Auto Alignment must be enabled. See page 50.Adjusts the set horizontal location for printing the first characteron a form when using manual feed from the platform. Selectablesettings: Left 10, Left 9, Ö Left 2, Left 1, Right 1, Right 2 Ö Right9, Right 10, in increments of 1/180 inch (0.14 mm).The default is 0.1stDotAdj: Single Sheets/FormsNote Auto Alignment must be enabled. See page 50.ï 1stDotAdjCSFFApplies to sheets/forms fed through the optional CSF mounted inthe front of the printer.ï 1stDotAdjCSFRApplies to sheets/forms fed through the optional CSF mounted inthe rear of the printer.ï 1stDotAdjCutApplies to sheets/forms fed manually through the platform.Adjusts the set horizontal location for printing the first characterwhen using single sheets/forms. Selectable settings: Left 10,Left 9, Ö Left 2, Left 1, Right 1, Right 2 Ö Right 9, Right 10, inincrements of 1/180 inch (0.14 mm).The default is 0.1stDotAdj: Continuous Formsï 1stDotAdjFrontApplies to continuous forms fed through the front tractor.ï 1stDotAdjRear