Oki Microline 8810 User Manual

Also see for ML8810: Setup guide Installation instructions Brochure Safety & warranty Hardware installation instructions

Contents

Microline 8810 Userís Guide63PitchChoose the character width, in characters per inch (cpi): 10 [thedefault], 12, 15, 17.1, or 20 cpi.Power Save TimeSets the time the printer waits before entering the Power SaveMode when Power Saving is set to Enable [the default]: 5 min,10 min [the default], 15 min, 30 min, or 60 min.Power SavingSets whether or not the printer enters the energy-saving PowerSave Mode after the interval specified under Power Save Time.The default is Enable.Print DEL CodeIBM emulation only.The default is No. Change he setting to Yes if you want to printthe DEL code (decimal 127) as a solid box.Print Dir. Cmd.The default is Valid: the printer will recognize a command forunidirectional printing. Change to Invalid if you do not wish theprinter to recognize uni-directional printing commands.Print ModeChoose the print quality and speed: Utility [the default], NLQCourier, NLQ Gothic, or DRAFT.Print SuppressThe default is No. If your system uses the DC1 and DC3 codesfor print suppress mode, change the setting to Yes.Prop. SpacingThe default is No. Choose Yes to engage proportional spacing ofcharacters.ProtocolApplies only when the optional RS-232C Serial Interface isinstalled.