Oki Microline 8810 User Manual

Also see for ML8810: Setup guide Installation instructions Brochure Safety & warranty Hardware installation instructions

Contents

Microline 8810 Userís Guide60Manual Sheet CSFApplies only when the optional CSF is installed.Determines which TOFs and Eject Direction settings will be usedfor manual feed sheets printed while the CSF is selected. If youwant the printer to use the Manual Feed menu settings, changethe setting to Manual.Memory Auto AlignApplies only to manual feed from the platform.The default is Valid. This causes the Auto Align setting madeusing the front panel switches MODE and SHIFT (see page 11) tobe stored in the printerís memory. Change to Invalid if you donot wish this value to be stored.Multi PassSelect the print direction (Bi-directional: the default, orUni-directional) for a line containing double-height print.Page LengthChoose the length of the media you are using:76.2 mm (3"),82.6 mm (3.25"), 88.9 mm (3.5"), 101.6 mm (4"), 127.0 mm(8"), 139.7 mm (5.5"), 152.4 mm (6"), 177.8 mm (7"), 203.2mm (8"), 215.9 mm (8.5"), 279.4 mm (11") [the default], 296.3mm (11.67"), 304.8 mm (12"), 355.6 mm (14"), 431.8 mm(17").Note If the printer receives a page length setting command, itwill override this menu setting.Page WidthChoose the width of the media you are using: 8", 10.6", 13.2",or 13.6" [the default].Panel FunctionWhen the Panel Function setting is changed to Limited, theQUIET (SHIFT + FF) and NORMAL PRINT (SHIFT + LF) switchesdonít work. This prevents these settings from being changedwhen several people are using the printer.