h2h QIDial DirectoriesProgramming One-Touch KeysYour machine has ten One-Touch keys for rapiddialing. You can store up to two fax numbers with40 digits for each One-Touch key, a main numberand an alternate number, which is used if the mainnumber is busy. You can also enter a 15-characterLocation ID (name) for each One-Touch key.Tip: To find One-Touch keys which are notyet registered, repeatedly press theSEARCH key.Fig05_18c.eps1 Press the SELECT FUNCTION key.2 Press the 8/LOCATION PROG. One-Touchkey. The display shows LOCATION PRO-GRAMMING.3 Press a One-Touch key to program.4 The display briefly shows NO=,ID= (or a previously pro-grammed fax number and Location ID).5 After the display clears, enter the main faxnumber. Refer to the instructions below.To Do This UseEnter numbers Numeric keypad(press once)Enter spaces 5/SPACEOne-Touch keyEnter hyphens 9/HYPHEN keyEnter plus 8/+ key(for chain dialing)Enter pauses Pause key(wait for long distanceor outside lines)Add a switch from keypulse to tone dialingfor part of the callMove the cursor YES and NOto make correctionsDelete 6/DEL key6 Press the START key.7 Enter the Location ID. This is a descriptive titleup to 15 characters long. Refer to the instruc-tions below.To Do This UseEnter numbers Numeric keypad(press once)Enter spaces 5/SPACEOne-Touch keyEnter hyphens 9/HYPHEN keyEnter alphabet characters Locate the characteryou want on thenumeric keypad.Press that keyrepeatedly until thecharacter appears.Enter a unique character Press the 0/UNIQUE keyrepeatedly until thecharacter you wantappears.The followingcharacters areavailable: ! # & ‘ ( ) *+ , - . / : ; = ? · @ \ “_ % ~ ä ß ñ ö ü Æ ÅØ æ å ø.Note: Some uniquecharacters can beentered using One-Touch keys.Enter two letters using Press NO tothe same key. move to the nextcharacter.Move the cursor to YES and NOmake corrections.Delete 6/DEL One-Touchkey
