TR yuspe2RSVH2
2qConfidential Reception ReportThis report is automatically printed each time yourmachine receives a confidential message into amailbox. Information in this report includes.- The date the message was received.- The total amount of time your machine spentreceiving the message (S,R-TIME).- The Location ID or telephone number of thefax machine you were communicating with(DISTANT STATION ID).- The number of the mail box into which themessage was received.- The number of pages received.- The result of the communication.- Service codes.Broadcast Confirmation ReportUse this report to confirm the results of a multiple-location transmission (or broadcast). Informationprovided on this report includes:- The date and time at which the broadcaststarted.- The total amount of time used to complete thebroadcast.- For each location, the Location ID, the num-ber of pages sent and the result of the com-munication.Broadcast Entry ReportEach time you program a multiple-location trans-mission (or broadcast), your machine gives you theoption of printing this report to confirm your entries.Information in this report includes:- The Location ID of the One-Touch keys andAuto Dial codes you have selected.- Telephone numbers you have manuallyentered using the numeric keypad.Message Confirmation ReportThis report provides information about your lastsingle-location fax transmission or polling transmis-sion. Information in this report includes:- The date of the communication.- The total amount of time your machine spentsending or receiving (S,R-TIME).- The Location ID or telephone number of thefax machine you were communicating with(DISTANT STATION ID).- The communication mode used.- The number of pages sent or received.- The result of the communication.- Service codes.- If any error occurred during the communica-tion, a portion of the page which experienceda problem prints after the report.Configuration ReportThe configuration report provides a list of thecurrent operational settings of your fax machine.The information includes:- The current settings of all your machine’suser functions.- The Sender ID (ID=), TSI/CSI (TEL NO.), andcall back number currently programmed intoYour machine.- Your machine’s current dial parameter set-tings.