- 11 -When disposing of or giving away the SD card, notethat:≥ Formatting and deletion of this unit or computer onlychanges the file management information and doesnot completely delete the data in the SD card.≥ It is recommended that the main SD card is eitherphysically destroyed or the SD card is physicallyformatted using this unit when disposing of or givingaway the SD card.≥ To physically format, connect this unit to the ACadaptor, select [CARD FUNCTION] #[FORMAT CARD] # [SD CARD 1] or [SD CARD 2]from the menu, and touch [YES]. Press and hold REC/PAUSE button in the following screen for threeseconds. Screen to delete the SD card data isdisplayed, so select [YES] and follow the instruction onthe screen.≥ The customer is responsible for the management ofthe data in the SD card.≥ When the LCD monitor is dirty or condensation hasoccurred, please wipe it using a soft cloth such as alens cloth.≥ Do not touch the LCD monitor with your finger nails, orrub or press with strong force.≥ It may become hard to see or hard to recognize thetouch when the LCD protection sheet is affixed.≥ When the unit has become very cold, for example dueto storage in a cold area, its LCD monitor will beslightly darker than usual immediately after the unit isturned on. The normal brightness will be restoredwhen the unit’s internal temperature rises.It is possible to distribute the streaming image of the unit(IP image transmission) or change the setup of the unit(IP control) by operating the web browser screen of a PCor mobile terminal connected to the unit via a network.(l 120, 190)≥ The IP image refresh speed and operations from theweb screen/remote camera controller may becomeslower depending on the following factors.j Network environmentj Performance of your PC or mobile terminalj Subjectsj Number of accesses to the unitj Writing speed of the SD card being used (whenrecording to the SD card)≥ Do not run the Easy IP Setup Software on a multiplenumber of personal computers for a single camera andset the IP address at the same time. Otherwise, youwill be unable to complete the proper procedure andset the IP address correctly.About the SD card (optional)LCD monitorExtremely high precision technology is employed toproduce the LCD Monitor screen. The result is morethan 99.99% effective dots with a mere 0.01% of thedots inactive or always lit. However, this is not amalfunction and does not affect the recorded picture.About operation from the Web screen