- 128 -Set the network on this unit1 Select the menu.≥ [RECORDER LAN SETUP] performs the network setup of this unit, and [CAMERA LAN SETUP] performs thenetwork setup of the camera head.≥ [RECORDER LAN SETUP] can be set only during SDI Mode.≥ [CAMERA LAN SETUP] can be set only during CAM Mode.2 Touch and set the desired items as needed.≥ All default settings are indicated with underlined text.≥ [IP Address], [Subnet Mask], and [Gateway] cannot be set when [DHCP] is set to [ON].≥ [MAC Address] cannot be changed.Entering textOperate in the same way as you enter characters with a keyboard.: [NETWORK SETUP] # [RECORDER LAN SETUP] or [CAMERA LAN SETUP][DHCP]: Sets if the DHCP function is to be used or not by [ON]/[OFF]. Set the DHCP server so a PCnot using the DHCP function and other camera head or this unit does not have the same IPaddress. Contact the system administrator about the setup of the server.Setup value: [ON]/[OFF][IP Address]: Enter the IP address.≥ This is set up as follows at the time of purchase.j [RECORDER LAN SETUP]: [192.168.0.10].j [CAMERA LAN SETUP]: [192.168.0.10].[Subnet Mask]: Enter the subnet mask.≥ The default setting is [255.255.255.0].[Gateway]: Enter the gateway.≥ The default setting is [192.168.0.1].[DNS]: Sets if the DNS server address is to be acquired automatically (Auto) or entered manually(Manual). It is necessary to set the DNS when [MANUAL] is set. The DNS server address isautomatically acquired by setting to [AUTO] when the DHCP function is used. Contact thesystem administrator about the setup.Setup value: [AUTO]/[MANUAL][Primary DNS]/[Secondary DNS]: Enter the IP address of the DNS server when [MANUAL] is to be used for [DNS]. Contactthe system administrator about the IP address of the DNS server.[MAC Address]: Displays the MAC address.ヮユワヶ
