- 190 -It is possible to distribute the streaming image of this unit (IP image transfer) or change the setup of this unit (IPcontrol) with the web screen of the mobile terminal by connecting this unit and a mobile terminal to a network via awireless access point that is connected to this unit.Connect to this unit from the mobile terminal and display the image of this unit (JPEG format only). The image will beautomatically updated to the most current state. Operations such as zoom, focus, or white balance can also beperformed from the mobile terminal.Refer to page 124 for supported models.≥ Images are displayed only in the JPEG format when using the mobile terminal.≥ When the authentication dialog box is displayed, input the user name and password. The default settings for theuser name and password are as follows.≥ If the mobile terminal does not support the character code UTF-8, the characters cannot be displayed properly.1 Input “http://IP address/mobile/ ” using the mobile terminal, and press the enter button.≥ The unit’s images will now be displayed.Iris When this button is pressed, the buttons for performingthe iris operations are displayed on the screen.ZoomThe unit’s zooming operations are performed using thesebuttons.Network connectionRemote operation by a mobile terminalUser name adminPassword 12345This switches the iris between auto andmanual.At the auto setting, the button label is green.This adjusts the iris in the “close” direction.It does not work during automaticadjustments.This adjusts the iris in the “open” direction.It does not work during automaticadjustments.Use this to adjust the zoom (magnification) to1.0k.Use this to adjust the zoom (magnification) inthe Wide direction.Use this to adjust the zoom (magnification) inthe Tele direction.
