- 64 -Setting the User InformationEight digit hexadecimal alphanumeric can be entered and displayed as a memo information such as dates, controlnumbers, etc., into the User Information.UB 00 00 00 00≥ This is displayed only when [PRIORITY MODE] is set to [REC/PB] or [IP]. (l 32)You can set the User Information.≥ Set [PRIORITY MODE] to [REC/PB] or [IP]. (l 32)1 Select the menu.2 Touch the item to set and change with / .≥ You can use numbers from 0 to 9 and letters from A to F.≥ It will be set to “00 00 00 00” when [Reset] is touched.3 Touch [EXIT] to complete the setting.≥ When [PRIORITY MODE] is set to [IP(4K)] or [REC/PB(4K)], the [UB PRESET] setting can be changed, but thechanged setting cannot be used.Setting the Recording CounterRecording Counter will display the recording time in seconds.0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL]))CLP 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [CLIP]))Select the counting method during the recording.Select the menu.To reset the Recording Counter for the Recording ModeRecording counter will be set to “0:00:00” when the USER button assigned as is pressed or the USER iconis touched while displaying the counter.≥ Please refer to page 65 for details about setting the USER button.[UB PRESET]: [TC/UB SETUP] # [UB PRESET][REC COUNTER]: [DISP SETUP] # [REC COUNTER] # desired setting[TOTAL]: The count continues to increase until the Recording Counter is reset.[CLIP]: Resets the Recording Counter at start of recording. Counts the time of each recordingsession.ヮユワヶヮユワヶ
