- 111 -Operation methodFor menu operation (Camera Text Menu), refer to page 109.A For operating the Camera Text Menus.[CAMERA OSD]:When this is pressed for about 2 seconds, the selected camera menu is displayed, overlapping the camera outputimage. When it is pressed for about 2 seconds while a menu is displayed, the menu is exited.[F1]:Turn [F1] to move the cursor up and down in the Camera Text Menu or to change setting values. Press [F1] tomove to the next level of a menu item or to change a setting value at the lowest level.B For selecting the cameras to be operated.∫ Switching between Day and Night mode1 Press the [MENU] button on the AW-RP50.≥ The [MENU] button lights, and the [PRESET MEMORY/MENU] buttons become selectable.2 Press the [9 (SETUP)] button in the [PRESET MEMORY/MENU] area.≥ The button lights, and the [SETUP] menu appears on the LCD panel.3 Turn the [F1] dial to select “FUNCTION”, then press the [F1] dial.≥ Press the [EXIT] button if [FUNCTION] is not displayed.4 Turn the [F1] dial to select “OPTION”.≥ “Off” or “On” appears on the bottom right (F2 area) of the LCD panel.5 Turn the [F2] dial to select “Off” or “On”, then press the [F2] dial.≥ If you operate the [IRIS] dial in Manual Iris Mode, the iris is adjusted, while if you operate the dial in Auto Iris Mode,the setup value of [AE LEVEL] is adjusted.≥ When one of [IRIS MODE]/[GAIN MODE]/[SHUTTER MODE] is set to [AUTO], even if you adjust the iris/gain/shutter speed, the brightness may not change.Remote camera controller [AW-RP50][Off]: Infrared Recording Mode Off[On]: Infrared Recording Mode OnPOWER ALARM F1 CAMERAOSDR/B GAIN R/B PEDSYSTEMSETUPCAMERASCENE/MODEDETAILDELETESTOREPAGEMENU F2 EXITUSER2USER1PT ACTIVEAUTOIRISAUTOHILOWPTZ/FOCUS SPEEDFOCUS/PUSH OAFTELEZOOMWIDECAMERA STATUS / SELECTIONPRESET MEMORY / MENUGAIN/PEDF2F11 2 3AWB/ABB4SHUTTER51 2 3 4 56 7 8 9 10
