- 22 -1 LCD monitor (Touch screen) (l 35)2 Power button [ ] (l 31)3 Menu button [MENU] (l 34)4 button5 AUDIO MON/ADV j button6 AUDIO MON/ADV i button7 Status indicator (l 31)8 button9 Tally lamp10 button11 REC/PAUSE button (l 41)12 SHIFT button (l 76)13 button14 SET button15 MODE button (l 33)16 User 1 button [USER1] (l 66)17 CAMERA terminal (l 29)18 Headphone terminal [ ] (l 81, 92)19 MIC/LINE IN input terminal (l 60)20 Camera remote terminal [CAM REMOTE] (l 92)≥ FOCUS IRIS terminal (3.5 mm (0.14 q) diameter mini jack)≥ ZOOM S/S terminal (2.5 mm (0.1 q) diameter supermini jack)21 SDI IN terminal [HD SDI IN] (l 30)22 SDI OUT terminal [HD SDI OUT] (l 93)23 HDMI OUT terminal [HDMI OUT] (l 93)24 Multipurpose screw hole≥ M3 (3 mm (0.1 q) diameter) type screws with lengthsup to 8 mm (0.3 q) can be used for the four screw holeson the side of this unit.≥ When using screws, do not apply excessive force.Also, if you use a M3 (3 mm (0.1 q) diameter) typescrew longer than 8 mm (0.3 q) in length, this unit maybe damaged.25 Exhaust opening (cooling fan) (l 39)26 Speaker27 DC input terminal [DC IN] (l 24, 226)≥ Connect the DC 12 V power source. When the voltagedrops to approximately 10 V, if the battery is notconnected, the unit will turn off automatically. Afterthat, even if the power supply voltage recovers, it willnot turn back on automatically. Please press the powerbutton for at least 2 seconds to turn on the unit.Units: mm [inch]28 USB 2.0 terminal (l 106)29 LAN connector for IP control [LAN ACT/LINK]≥ This LAN connector (RJ-45) is connected whenexercising IP control over the unit from an externaldevice. Use a cable with the following specifications forthe connection to the LAN connector:PreparationNames and Functions of Main Parts125 26 242428 103 4 5 611 12 13 14 15 167917 1821 22 2319 20272829LAN cable * (category 5 or above), max. 100 meters(328 feet)* Use of an STP (shielded twisted pair) cable isrecommended.5.9 [7/32]1.05 +0.10 98 0-0.23 0-0.2 [1/8][1/32] [11/32][5/16]
