- 131 -Also change the user names and passwords registered to the following.Refer to the operating instructions provided with your product for further information about the settings used for yourproduct.≥ Remote Camera Controller (AW-RP50, AW-RP120)≥ Remote Operation Panel (AK-HRP200)≥ Browsers and applications on computers, tablets, and smartphones.Displaying the web screenWith a PC connected to the unit, it is possible to view the IP image of the Camera Head or the unit or select varioussettings from the web browser.Select an IP address for the personal computer within the private address range while ensuring that it is different fromthe address of the unit. Set the subnet mask to the same address as the unit.Unit’s IP address and subnet mask (factory settings)IP address:192.168.0.10Subnet mask:255.255.255.0Range of private addresses:192.168.0.0 to 192.168.0.255≥ If the controller and web browser are being used at the same time, the content selected using the controller may notbe reflected on the web browser display. When using both the controller and web browser, be absolutely sure tocheck the settings using the controller or camera menu.≥ Some functions of the web setup screen are available only if you are using a Windows PC. (Not available for Mac)≥ For Windows, it is necessary to install the viewer plug-in software “Network Camera View 4S” in advance to displaythe IP image of the unit. (Not required for Mac)For further details, refer to “Installing the plug-in viewer software” (l 127).After changing the user name/passwordThe time zone screen and the clock setting screen are automatically displayed at the time ofpurchase. It is necessary to set the time zone and clock on the unit before operating it fromthe web screen. (l 36)For the operating environment of a PC, refer to page 124.
