AVCHD Recording and Playback: Using an Optional AVCHD Board 157AVCHD Recording and PlaybackUse the steps below to delete or protect clips.1 Press the MODE button to switch to the AVCHDmode.➝Refer to “Switching to AVCHD mode” (page 155).2 Press the MENU button.3 Select [OPERATION] and press the SET button.4 Press the up and down (4/5) cursor buttons to selectan item and press the SET button.DELETE:Deletes Clips.◆ NOTE:• Protected clips cannot be deleted.• Deleting clips selected using ALL CLIPS may take time if theclips are large.CLIP PROTECT:◆ NOTE:• Note that formatting an SD memory card will delete protectedclips.5 Press the MENU button to return to the thumbnailscreen.Use this function to check the model number and serialnumber of the unit.1 Press the MODE button to switch to the AVCHDmode.➝Refer to “Switching to AVCHD mode” (page 155).2 Press the MENU button.3 Use the cursor buttons to choose [SYSTEM INFO]and press the SET button.Deleting and protecting clips(OPERATION) ALL CLIPS: Deletes all clips. Select [YES]/[NO] andpress the SET button.SELECT: Deletes selected clips. Selecting a clipusing the SET button will display theselected clip inside an orange frame.(This allows you to make multipleselections.) Pressing the SET button asecond time cancels the selection.After selecting the clip, press the ENTRYbutton, select YES in the confirmationdialog and press the SET button todelete it.NO: The previous screen reappears.YES: Protects selected clips.(A symbol mark is displayed.)NO: Cancels protection of selected clips.(The symbol mark disappears.)Checking model number and serial number(SYSTEM INFO)
