Setup: Item Settings 181SetupThis menu sets the time code.• XX indicates factory default settings.TIME CODEItem SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.500 VITC BLANK00000001BLANKTHRU Specifies whether or not a VITC signal will be output at the positions selected in setupmenu No. 501 (VITC POS-1) and No. 502 (VITC POS-2) during playback.0: VITC signals are not output.1: VITC signals are output.NOTE:• This setting is available only during analog composite output and SD SDI output.• In EE mode, the input signal is output with the VITC signal.501 VITC POS-1When set to59.94 Hz, 29.97 Hz Specifies the position where the VITC signal will be inserted.NOTE:• You cannot select the same line as in setup menu No. 502 (VITC POS-2).• The VITC signal is not output when 23.98, 24, 59-23, 60-24, or 60-25 is selected insetup menu No.25 (SYSTEM FREQ).• You cannot select the same line as in setup menu No.692 (UMID POS).• This setting is available only during analog composite output and SD SDI output.• This setting does not return to factory default even if you press the SEARCH buttonand RESET button simultaneously.0000|0006|001010L|16L|20LWhen set to50 Hz, 25 Hz0000|0004|00157L|11L|22L502 VITC POS-2When set to59.94 Hz, 29.97 Hz Specifies the position where the VITC signal will be inserted.NOTE:• You cannot select the same line as in setup menu No. 501 (VITC POS-1).• The VITC signal is not output when 23.98, 24, 59-23, 60-24, or 60-25 is selected insetup menu No.25 (SYSTEM FREQ).• You cannot select the same line as in setup menu No.692 (UMID POS).• This setting is available only during analog composite output and SD SDI output.• This setting does not return to factory default even if you press the SEARCH buttonand RESET button simultaneously.0000|0008|001010L|18L|20LWhen set to50 Hz, 25 Hz0000|0006|00157L|13L|22L504 RUN MODE00000001RECFREESpecifies an operating mode that advances the internal time code generator.0: The internal time code generator is advanced only during recording.1: When the power is on, the internal time code generator is advanced regardless ofoperating mode.NOTE:When setup menu No. 040 (VFR REC) is set to ON, the time code advances only duringrecording even when FREE is selected.59.94Hz 50Hz 29.97Hz 25Hz only59.94Hz 50Hz 29.97Hz 25Hz only59.94Hz 50Hz 29.97Hz 25Hz only
