Clip Management: Thumbnail and Clip Management 51Clip ManagementThe thumbnail screen can be customized to suit operatingconditions and improve efficiency.1 Open the thumbnail screen.2 Press the MENU button.3 Use the cursor buttons to select the clip type thatshould appear under [THUMBNAIL].4 Press the SET button.Changing Thumbnail DisplaySwitching the type of information that isdisplayedRECTHUMBNAILSETMENU IN ENTRYSLOT CLIPPF1 ALL CLIPPF3 SHIFTPF4CLIP LISTPF2SLOT SELECTLAST X TRIMDELETEVIDEO GO TOOUTEDIT MODE A.DUBMODEA1A3A2A4DIAGOPERATIONEXITCANCEL/PFMULTISELCH 1 CH 2 CH 3 CH 4 TEXTMEMO TCGTC PRESETPROPINTREGENPRESETEXTMARKERVARUNITYVIDEO AUDIOPLAYLIST2143ALL CLIP: Show all clipsSAME FORMATCLIPS:Show clips in the same format asthe system and the same audio bitrecording as the setting of setupmenu No. 034 (A.SMPL RES).◆ NOTE:• When 23.98, 24, 29.97, 59-23, 60-24,25 or 60-25 is selected in setup menuNo. 25 (SYSTEM FREQ) only clips in aformat that can be recorded appear.• Clips with no audio recording areregarded as having the same audiobit recording as the setting of setupmenu No. 034 (A.SMPL RES).SELECTEDCLIPS:Show clips selected using the SETbutton.At this time the thumbnails appearin selected order. Use this functionto change the order clips areplayed back.MARKEDCLIPS:Show clips to which shot markshave been attachedTEXT MEMOCLIPS:Show clips that contain text memodata➝Refer to “Attaching Text Memosand Shot Marks” (page 60).SLOT CLIPS: Show clips on P2 card in slot No. n◆ NOTE:These operations can also beperformed using buttons.• Press SLOT CLIP (SHIFT + IN) andthe indication changes in thefollowing order each time thesebuttons are pressed: SELECTED ➝SLOT 1 ➝ SLOT 2 … SLOT 6 ➝SELECTED. (Only slots with cards willappear.)• Press ALL CLIP (SHIFT + OUT) toswitch to ALL CLIP.CONTINUOUSPB CLIPS:Show clips for playback when a P2card is inserted during playback.➝Refer to “Continuous Playback ofClips by Inserting/Removing P2Cards” (page 57)
