Panasonic AJ-HPM200P Operation Instruction Manual

Also see for AJ-HPM200E: Operating instructions

Contents

Panasonic AJ-HPM200P Operation Instruction Manual Manual pdf 162 page image

162 AVCHD Recording and Playback: Using an Optional AVCHD BoardTo turn off resume playback, set to [OFF] in step 4.◆ NOTE:• A change in setting will not change the resume playback settingof a P2 card.Select skip operation (cue up) to be performed during variousplayback operations and pause.1 Press the MENU button.2 Select [PLAY SETUP] and press the SET button.3 Select [SKIP MODE] and press the SET button.4 Select skip operation and press the SET button.5 Press the MENU button to return to the thumbnailscreen.◆ NOTE:• An index is attached to a certain video point of a clip beingrecorded or played back. You can then select only clips withindexes for display/playback. Note, however, that an indexcannot be attached nor removed by this unit.Use the steps below to play back clips, which are availableonly from thumbnails.1 Use the cursor buttons to move the cursor to the clipyou want to play.2 Press the PLAY button.The clip at the cursor location will now be played.Press the STOP button to stop playback and return tothumbnails.Use the search dial during playback or pause to selectplayback speed.Press the PLAY button to return to normal playback.◆ NOTE:• The audio is played back only at 1x speed.• During reverse playback, video is played back with gaps every 0.5sec interval.• In JOG mode, not like during P2 card playback, a smooth playbackis not possible.• In SHTL mode, 16x playback speed is available (maximum).1 Play back or enter pause mode.2 Press the PREV (SHIFT + FF)/NEXT (SHIFT + REW)button.The unit will now perform set skip operation.Use the steps below to record AVCHD video to a P2 card inthe DVCPRO HD or AVC-Intra format.■ Preparing for recording1 Set recording and playback format.Set the recording format (1080i/720P) to the same formatas the PB format from setup menu No. 020 (SYS FORMAT)and set the recording format (DVCPRO HD/AVC-I 100/AVC-I 50) using setup menu No. 025 (REC FORMAT(HD)).Then set the playback format for AVCHD mode.➝Refer to “Setting playback format (PB FORMAT)” (page161).◆ NOTE:• Dubbing is not available when setting of the setup menu No.020(SYS FORMAT) differs from PB FORMAT.2 Insert a P2 card that can be recorded.Insert a card for dubbing or select a slot to enablerecording.◆ NOTE:• Dubbing is not available when loop recording is activated.Setting up skip mode (SKIP MODE)CLIP: Press NEXT (SHIFT + FF), PREV (SHIFT+ REW) buttons during a pause to moveto the beginning of the next or previousclip.CLIP & INDEX: Press NEXT (SHIFT + FF), PREV (SHIFT+ REW) buttons during a pause to moveto the beginning of the next or previousclip or the location of the next orprevious index location.Playing Back AVCHD ClipsPlaybackSlow/fast forward/rewindClip forward/rewindRecording AVCHD Material on P2Cards