Panasonic AJ-SPX800P Operating Instructions Manual

Also see for AJSPX800P - P2 CAMCORDER: Mechanical Parts List Operating instructions Operating instructions

Contents

514Battery type PRO14 - AC_ADPT Battery type, selected through a menu option. When the AC adapter is connected,it is indicated as AC_ADPT.Battery remaininglevel/voltage__._V___%EMPMAXBattery remaining level in tenths of a voltDigital battery remaining level, as a percentageDigital battery empty.Digital battery fully charged.Camera-recorderREC indicationREC When the AJ-SPX800P is used as a system camera using a 26-pin extender orTriax, the recording status of the camera-recorder is displayed using characters.The indication stays illuminated during recording. This is displayed when the menuoption REC TALLY of the SYSTEM MODE is set to “CHAR”.This can also be displayed during the recording using the AJ-SPX800P alone.This is displayed when the menu option REC STATUS of the VF INDICATOR2 isset to “ON”.P2 card remainingfree space___minENDWPLOOPINFO P2_/_The indication “___min” stays illuminated under normal conditions or blinks whenthe remaining level is near zero.When the card space is used up, “END” comes on.The P2 card is write-protected.The camera-recorder is in LOOP REC mode. When loop recording cannot beperformed, for example because the P2 card has no free space, the indicationblinks.P2 card being recognised.Total free space/capacities of the P2 cards (when MODE CHECK is beingperformed).When the menu option P2 CARD REMAIN is set to “ONE CARD”, the number ofthe P2 card slot that contains the target card is indicated, together with theremaining space.For more information, see [P2 Card Remaining Free Space/capacity Indication](page 52).2 card remainingfree space (whenMODE CHECK isbeing performed)___min The number of the P2 card slot that contains the target card and the remaining freespace (when MODE CHECK is being performed) are indicated. In LOOP RECmode, the minimum guaranteed recording time is indicated. This indication alsoappears when the target P2 card has been switched with a user button.The minimum guaranteed recording time refers to the sum, at the time looprecording is stopped, of the remaining free space of available P2 cards, except forthe card with the largest remaining free space.Example: If three P2 cards are available, with remaining space of eight minutes,five minutes and two minutes respectively, then the minimumguaranteed recording time is seven minutes.D.ZOOM DZ Camera-recorder in digital zoom mode. Note that the indication blinks while thecamera-recorder is in FOCUS mode.Super iris ON/superblack ONSBSBSuper iris ON.Super black ON.Super iris and super black both ON.Color temperature _._K Color temperature assigned to A, B, and PRE of the WHITE BAL switch (this is avalue stored at AWB performance or a value set through the menu option). Theindication is not provided in ATW mode.Shutter speed/mode 1/__._1/100 - 1/2000SUPER VShutter speed set to SYNCHRO SCAN.Shutter speed fixed.Shutter speed set to SUPER V (high vertical resolution mode).Information Item Indication StatusᤨࠫDownloaded From VideoCamera-Manual.com Manuals