826-5 Switching the Thumbnail DisplayThe display can be switched so that only those clips matchingthe specified conditions are displayed in the thumbnail screen.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Press the MENU BAR button. The pointer moves to themenu bar.3 Move the pointer over THUMBNAIL and press the SETbutton to select it. A sub-menu appears. Switch thethumbnail display by selecting one of the following items:ALL CLIPS:Display all clips.SELECTED CLIPS:Display randomly selected clips.MARKED CLIPS:Display clips with shot marks attached.VOICE MEMO CLIPS:Display clips with voice memo data attached.SLOT CLIPS:Display clips recorded in the P2 card inserted in thespecified slot.When this item is selected, SLOT1 to SLOT5 are displayedas a sub-menu. Select the desired slot to display the clips.SETUP:Please refer to [6-16 Setting the Thumbnail Display Mode]for information about this item.EXIT:Close the sub-menu.6-6 Shot MarkA shot mark can be added to a clip thumbnail to distinguish thisclip from the others.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Use the cursor buttons to move the pointer over the clip towhich you want to attach a shot mark.3 Press the Shot Mark button.4 A shot mark will be attached to the clip thumbnail under thepointer.To delete a shot mark, reposition the pointer over the clipand press the Shot Mark button.z A shot mark can be attached during recording. Please refer to[3-10 Shot Mark Function] for more information.z When adding a shot mark to (or deleting the shot mark from) aclip recorded across multiple P2 cards, do this with all theseP2 cards inserted into P2 card slots.MENU BAR ButtonShot Mark ButtonᤨࠫDownloaded From VideoCamera-Manual.com Manuals
