Panasonic AJ-SPX800P Operating Instructions Manual

Also see for AJSPX800P - P2 CAMCORDER: Mechanical Parts List Operating instructions Operating instructions

Contents

68Using an NP-1 type battery pack1 Remove the battery holder.2 Mount the NP-1 type battery case on the camera-recorder. Tighten the mounting screws. Tighten the power contact screws.Insert the upper part of the removed cover in thedirection of the arrow.Align the holes in the bottom part (metal part) of thecover with the holes in the case, and secure the coverwith the screw.When mounting the battery holder, take care not to pinchthe connection cord.When using a V-mount type battery packMount the V-mount adapter plate.Insert the plate and slide it in the direction of the arrow.3 Setting the battery type.Select the battery type listed under BATTERY SELECT.Select BATTERY SELECT from the screen on the MAIN OPERATION page.When using a battery not listed under BATTERY SELECT:If it is a NiCD battery, select “NiCd14(14V)”, “NiCd13(13V)”,or “NiCd12(12V)”, depending on the battery voltage. Setthe other items according to the battery properties. If it isnot a NiCd battery, select TYPE A or TYPE B and set theother items according to the battery properties.Please refer to [8-6-3 BATTERY SETTING2] for moreinformation.For information about the V-mount adapter plate, pleasecontact the store where you purchased the camera-recorder.Battery Case (for NP-1 type)ᤨࠫDownloaded From VideoCamera-Manual.com Manuals