606 Turn the JOG dial button until a desired character appears.The characters that appear are switched in the followingorder:Space: ÐAlphabetical characters: A to ZÐNumerals: 0 to 9ÐSymbols: ', >, <, /, -7 Press the JOG dial button to accept a desired character.8 Turn the JOG dial button to move the cursor to the next digit(clockwise), and repeat Steps 6 - 7 to set characters (up toeight characters).9 When the title is set, turn the JOG dial button to move thecursor to [:].10Press the JOG dial button to return the cursor to the option[TITLE:].11 Turn the JOG dial button to move the cursor to the option[WRITE].12Press the JOG dial button to display the following message:The data will not be written if any of the following messagesappears when the JOG dial button is pressed:13 Turn the JOG dial button to move the cursor to YES. Then,press the dial button.When the data has been written, the following messageappears:14 To exit the menu, press the MENU button.The settings menu disappears and the status of the AJ-SPX800P is indicated at the top and bottom of theviewfinder screen.To write data on a selected file 6'&$5'5($':5,7(!56(/(&7 5($':6(/(&7 :5,7(&$5'&21),*7,7/(5($'7,7/( :5,7("<(6 127,7/( Error message RemedyWRITE NGNO CARD(No SD memory card inserted.)Insert an SD memory card.WRITE NGFORMAT ERROR(SD memory card not properlyformatted.)The card has not been formattedusing the AJ-SPX800P.Replace the card.WRITE NGERROR(SD memory card not writable.)The card may be defective.Replace the card.WRITE NGWRITE PROTECT(SD memory card write-protected.)Remove the card and disable theprotect.WRITE NGCANNOT ACCCESS(SD memory card not accessible).Example: The SD memory card isnot accessible because it is beingplayed back.After the operation in process,format the card.WRITENGCARD FULL(SD memory card has no freespace.)The card is not writable because ithas no free space. Deleteunwanted files or replace the cardwith a new one.:5,7(2.ᤨࠫDownloaded From VideoCamera-Manual.com Manuals
