614To read data on an SD memory card1 Turn the JOG dial button to move the cursor to the option[SD CARD READ/WRITE]. Then, press the dial button.2 Turn the JOG dial button to move the cursor to the menuoption [R. SELECT]. Then, press the dial button.3 Turn the JOG dial button to select a desired number (1 - 8).Then, press the dial button.4 Turn the JOG dial button to move the cursor to the option[READ].5 Press the JOG dial button to display the following message:6 Turn the JOG dial button to move the cursor to YES. Then,press the dial button.When the data has been read, the following messageappears:The data will not be read if any of the following messagesappears when the JOG dial button is pressed:7 To exit the menu, press the MENU button.The settings menu will be replaced by status indications forthe AJ-SPX800P.To select a file number 6'&$5'5($':5,7(! 56(/(&75($':6(/(&7:5,7(&$5'&21),*7,7/(5($'7,7/( To read data on a selected file 6'&$5'5($':5,7(!56(/(&7 5($':6(/(&7 :5,7(&$5'&21),*7,7/(5($'7,7/( 5($'"<(6 12Error message RemedyREAD NGNO CARD(No SD memory card inserted.)Insert an SD memory card.READ NGFORMAT ERROR(SD memory card not properlyformatted.)The card has not been formattedusing the AJ-SPX800P.Replace the card.READ NGNO FILE(No file found.)Write file data.READ NGERROR(SD memory card not readable.)Only data written with the AJ-SPX800P is readable.READ NGCANNOT ACCCESS(SD memory card not accessible.)Example: The SD memory card isnot accessible because it is beingplayed back.After the operation in process,read data.5($'2.ᤨࠫDownloaded From VideoCamera-Manual.com Manuals
