Panasonic AW-RP50E Operating Instructions Manual

Also see for AW-RP50E: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

10 (E)ENGLISHSelecting the settings for a selected remote cameraManually adjusting the white balance( Setting the R and B gain values)1 As with the automatic adjustment, fill thescreen with a white subject.2 Connect a waveform monitor or colour monitorto the video output connector on the currentlyselected remote camera.3 Set the MENU button to ON.Press the MENU button to light its indicator.4 Set the PRESET MEMORY/MENU 2 button(R/BGAIN) to ON.When the button is pressed and its indicator lights, the[R/BGAIN] menu is displayed on the LCD panel.5 Turn the F1 dial to select the R gain setting;similarly, turn the F2 dial to select the B gainsetting.RGAIN : ±0BGAIN : ±0F1 dialF2 dialThe settings will differ depending on the remote cameraconnected.For further details, check the Operating Instructions ofthe model concerned.NoteAuto tracking white adjustment (ATW)This function provides compensation automatically so thatthe white balance is adjusted even when the light source orcolour temperature changes during shooting, so that imagesthat appear the least odd (that is, the most natural looking)are produced.1 Set the MENU button to ON.Press the MENU button to light its indicator.2 Set the PRESET MEMORY/MENU 4 button(AWB/ABB) to ON.When the button is pressed and its indicator lights, the[AWB/ABB] menu is displayed on the LCD panel.3 Turn the F1 dial to select ATW.AWB MOD: ATWSET : AWB If there is no white on the screen, it may not be possibleto compensate the white balance properly.Similarly, under certain light source and colourtemperature conditions, it may not be possible tocompensate the white balance properly.The settings will differ depending on the remote cameraconnected.For further details, check the Operating Instructions ofthe model concerned.Note