8 (E)ENGLISHSelecting the settings for a selected remote camera Setting the white balanceThe ratio between RGB (three primary colours) is adjustedso that white will be reproduced accurately.If the white balance is off, not only will white be reproducedpoorly but the colour tone of the entire picture will alsodeteriorate.The white balance must be adjusted when using a remotecamera for the first time or when the remote camera hasnot been used for a prolonged period of time. It must alsobe adjusted when changes have been made in the lightingconditions or brightness.The white balance can be adjusted automatically ormanually (fine adjustment after automatic adjustment).In addition, preset values or the “auto tracking whiteadjustment (ATW)” which continues to adjust the whitebalance automatically all the time can be selected.The results of white balance adjustments can be storedin memory A or memory B when “AWB A” or “AWB B” hasbeen selected for the white balance.Selecting the white balance modeFollow the steps below to set the white balance mode.1 Set the MENU button to ON.Press the MENU button to light its indicator.2 Set the PRESET MEMORY/MENU 4 button(AWB/ABB) to ON.When the button is pressed and its indicator lights, the[AWB/ABB] menu is displayed on the LCD panel.3 Turn the F1 dial to select the white balancemode.AWB MOD: AWB BSET : AWBThe modes which can be selected differ depending on theremote camera connected.Remotecamera Mode Remote camera statusAW-HE50AWB AThe status of the white balanceregistered in remote cameramemory A is established.AWB BThe status of the white balanceregistered in remote cameramemory B is established.ATWIn this mode, the white balance isautomatically adjusted continuouslyall the time and automaticallycompensated even when the lightsource or colour temperature haschanged.AW-HE100AW-HE870AW-E860AW-E750AW-E650AW-E350AWB AThe status of the white balanceregistered in remote cameramemory A is established.AWB BThe status of the white balanceregistered in remote cameramemory B is established.3200KThe status of the white balancewhich was adjusted at a brightnessof 3200K is established.5600KThe status of the white balancewhich was adjusted at a brightnessof 5600K is established.ATWIn this mode, the white balance isautomatically adjusted continuouslyall the time and automaticallycompensated even when the lightsource or colour temperature haschanged.AK-HC1500AK-HC1800