Panasonic AW-RP50E Operating Instructions Manual

Also see for AW-RP50E: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

3 (E)How to turn the power of the remote cameras on and off How to turn the power of theremote cameras onFollow one of the procedures below to turn on the power ofthe remote cameras. Turning on the power one camera at a time Turning on the power of a multiple number of cameras• Turning on the power of all the cameras• Turning on the power of the selected group of camerasEach of these procedures is described in turn below.Turning on the power one camera at a time1 Select the remote camera.When the corresponding CAMERA STATUS/SELECTION button is held down, the name of theremote camera is displayed on the top line of the LCDpanel and POWER OFF is displayed on the bottom line.2 Turn the F2 dial to select “ON”, and press theF2 dial.The power of the selected remote camera is turned on.POWER ALARM F1 CAMERAOSDR/B GAIN R/B PEDSYSTEMSETUPCAMERASCENE/MODEDETAILDELETESTOREPAGEMENU F2 EXITUSER2USER1PT ACTIVEAUTOIRIS CAMERA STATUS / SELECTIONPRESET MEMORY / MENUGAIN/PEDF2F11 2 3AWB/ABB4SHUTTER51 2 3 4 56 7 8 9 10CAM100 >POWER: ON12Turning on the power of a multiple number of cameras1 Set the MENU button to ON.Press the MENU button to light its indicator.2 Set PRESET MEMORY/MENU 8 button(CAMERA) to ON.When the button is pressed and its indicator is lit, the[CAMERA] menu is displayed on the LCD panel.[1]GROUP ▼3 Turn the F1 dial to display the [POWER] menu,and press the F1 dial.[2]POWER1.CAM POWER ▼ALL OFFPress the F1 dial.Turning on the power of all the cameras4 Turn the F2 dial to select “ALL ON”, and pressthe F2 dial.1.CAM POWER ▼ALL ONThe power of all the remote cameras is now turned on.Turning on the power of the selected group ofcameras4 Turn the F2 dial to select “GROUP ON”, andpress the F2 dial.1.CAM POWER ▼GROUP ONThe power of the selected group of remote cameras isturned on.