19 (E)Setting the functions Settings when the remote cameramoves horizontally or vertically duringtele shootingDuring tele shooting, the remote camera’s pan/tilt operationare slowed down to make positioning easier.This function takes effect when the unit is connected tothe AW-HE50. It does not work with any other models.NoteFrom the [SETUP] menu, select [OPERATE] and display[SPEED WITH Z]. Then set the movement speed.5.SPEED WITH ZOffOn: The speed at which the remote camera moves isreduced.Off: The remote camera moves at the normal speed. Selecting the control items (pan, tilt,zoom and focus)Select the control items for the currently selected remotecamera.From the [SETUP] menu, select [OPERATE] and display[SPEED TARGET]. Then select the control item.6.SPEED TARGETP/T/Z/FP/T/Z/F:The operation speed setting takes effect for panning,tilting, zooming and focusing.P/T:The operation speed setting takes effect for panningand tilting. Switching from focus control to iriscontrol or vice versaIt is possible to switch the control, which is implemented bydial and button operations, from focus control to iris control(or vice versa).AUTOIRISAUTOHILOWPTZ/FOCUS SPEED PAFOCUS/ PUSH OTAFTELEZOOMWIDECAMERA STATUS / SELECTION1 2 3 4 5From the [SETUP] menu, select [OPERATE] and display[FOCUS/IRIS]. Then select either “STANDARD” or“EXCHANGE”.7.FOCUS/IRISSTANDARDWhen “EXCHANGE” is selected as the setting, focus controland iris control are switched.When “STANDARD” is selected, the original control isrestored. Setting the PAN/TILT lever inclinationand speedThe correlation between angle and operating speed whenthe PAN/TILT lever is inclined can be adjusted.From the [SETUP] menu, select [OPERATE] and display[P/T CURV]. Then set the correlation between the leverangle and its operating speed.8.P/T CURV ▲1 The higher the value selected, the slower the operatingspeed.Operating speedInclination of lever