Panasonic AW-RP50E Operating Instructions Manual

Also see for AW-RP50E: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

11 (E)Selecting the settings for a selected remote camera Setting the black balanceThe black balance must be adjusted when using a remotecamera for the first time or when the remote camera has notbeen used for a prolonged period of time.It must also be adjusted when significant changes haveoccurred in the ambient temperature or at the change of theseasons.If the camera is used with the same settings and under thesame conditions, the black balance need not be adjustedagain.When the black balance is adjusted again, the previousmemory data will be erased and replaced with the new blackbalance settings.When the black balance is set, the R and B pedestaladjustment settings are returned to ±0.Automatically adjusting the black balance1 Set the MENU button to ON.Press the MENU button to light its indicator.2 Set the PRESET MEMORY/MENU 4 button(AWB/ABB) to ON.When the button is pressed and its indicator lights, the[AWB/ABB] menu is displayed on the LCD panel.3 Turn the F2 dial to select ABB, and press theF2 dial.AWB MOD: AWB BSET : ABBThe remote camera now automatically adjusts the blackbalance.When automatic adjustment is performed, the followingdetails are displayed on the LCD panel.ABB ACTIVE:This appears while ABB is being executed.ABB OK:This appears for 3 seconds after ABB was completedsuccessfully.ABB NG:This appears for 3 seconds after ABB was completedunsuccessfully.The settings will differ depending on the remote cameraconnected.For further details, check the Operating Instructions ofthe model concerned.NoteManually adjusting the black balance( Setting the R and B pedestal)1 Connect a waveform monitor or colour monitorto the video output connector on the currentlyselected remote camera.2 Set the MENU button to ON.Press the MENU button to light its indicator.3 Set the PRESET MEMORY/MENU 3 button(R/BPED) to ON.When the button is pressed and its indicator lights, the[R/BPED] menu is displayed on the LCD panel.4 Turn the F1 dial to select the R pedestalsetting; similarly, turn the F2 dial to select theB pedestal setting.RPED : ±0BPED : ±0F1 dialF2 dialThe settings will differ depending on the remote cameraconnected.For further details, check the Operating Instructions ofthe model concerned.Note