Panasonic Diga DMR-E95H Operating Instructions Manual

Also see for DMR-E95: Firmware instructions

Contents

11RQT7392Getting startedIf you are using a cable TV box, set the following:≥Cable TV box connection channel (Ch2/Ch3/Ch4/L3)–If you are connecting the cable TV box to this unit’s IN3 (L3)terminal, select “L3”.–If you are connecting the cable TV box to this unit’s RF terminal,select “Ch2”, “Ch3” or “Ch4”, according to the cable TV boxsetting.≥Cable TV box brand(Move down with [4] for more brands. Select “Not Listed” if youcannot find your cable TV box on the list.)≥IR signal codeMake sure your cable TV box is set to the channel that appearson screen and press [ENTER]. A test is performed.–If the cable TV box has changed to channel 09, select “Yes” andpress [ENTER].–If the cable TV box is still set to the same channel, select “No”and press [ENTER]. Repeat this step until the cable TV boxchanges to channel 09.∫ The set contents are displayed together–If the information is correct, select “Yes, end setup” and press[ENTER].–If the information is not correct, select “No, repeat setupprocess” and press [ENTER] to start the setting again.Once you confirm the input content, the following screen appears.3 Press [ENTER].A television reception screen or a blue background screen isdisplayed.If you do not want to use TV Guide On Screen TM system➡ page 50, Auto channel/clock settings4 Press [Í DVD POWER].Leave the unit turned off until the unit downloads the televisionprogram list. This may take up to a maximum of 24 hours.When the unit is connected to a cable TV box≥The cable TV box must be turned on in order to download thetelevision program list.≥Note that the television program list may not be downloadedcorrectly if you change the channel of the cable TV box while theunit is turned off.If you find “There is no data for this screen” on the television whenyou turn the unit on, the unit has not yet downloaded the programlist.This unit may download more than one channel line-up. Follow theon-screen guidance and select one of the channel line-ups(➡ page 23).Set the clock manually.Please note that the program list is not displayed until the unitdownloads it. Timer program recording is only possible manually.1 Press [SETUP].2 Press [3, 4] to select “Set Up” andpress [1].3 Press [3, 4] to select “Manual ClockSetting” and press [ENTER].4 Press [2, 1] to select the item youwant to change and press [3, 4] tochange the setting.5 Press [ENTER].The clock starts.6 Press [SETUP].≥DST (Daylight Saving Time): ON or OFFIf you select “ON”, the clock is advanced one hour starting at 2a.m. on the first Sunday in April and ending at 2 a.m. on the lastSunday in October.≥TIME ZONE shows the time difference from Greenwichmeantime (GMT).EST (Eastern Standard Time) l GMT j5CST (Central Standard Time) l GMT j6MST (Mountain Standard Time) l GMT j7PST (Pacific Standard Time) l GMT j8AST (Alaska Standard Time) l GMT j9HST (Hawaii Standard Time) l GMT j10Is your cable box now tuned to channel 09?YesNoZi p code - 11111 (USA)Cable - YesCable box - NoWhat would you like to do now?Watch TVSORTSCHEDULE LISTINGSThere is no datafor this screen.TODAYLastChannelSORTSCHEDULEFAVORITES RECORD INFO.87NWGBBOXpTVTVNWBGducationANiMeNetworkPBSLISTINGS8:30PM8:00PMTo use immediately (Manual Clock Setting)In the United States, TV GUIDE and other related marks areregistered marks of Gemstar-TV Guide International, Inc. and/or one of its affiliates. In Canada, TV GUIDE is a registeredmark of Transcontinental Inc., and is used under license byGemstar-TV Guide International, Inc. TV Guide On Screen,G-LINK, VCR Plusr and PlusCode are registered marks ofGemstar-TV Guide International and/or one of its affiliates.The TV Guide On Screen and VCR Plusr systems aremanufactured under license from Gemstar-TV GuideInternational, Inc. and/or one of its affiliates.GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR ITS RELATED AFFILIATES ARE NOT IN ANY WAYLIABLE FOR THE ACCURACY OF THE PROGRAMSCHEDULE INFORMATION PROVIDED BY THE TVGUIDE ON SCREEN SYSTEM. IN NO EVENT SHALLGEMSTAR- TV GUIDE INTERNATIONAL, INC. AND/OR ITS RELATED AFFILIATES BE LIABLE FOR ANYAMOUNTS REPRESENTING LOSS OF PROFITS,LOSS OF BUSINESS, OR INDIRECT, SPECIAL, ORCONSEQUENTIAL DAMAGES IN CONNECTIONWITH THE PROVISION OR USE OF ANYINFORMATION, EQUIPMENT, OR SERVICESRELATING TO THE TV GUIDE ON SCREEN SYSTEM.The TV Guide On Screen and VCR Plusr systems areprotected by one or more issued United States patents such as6,331,877; 6,239,794; 6,154,203; 5,940,073; 4,908,713;4,751,578; 4,706,121; 6,466,734; 6,430,359; 6,091,882;6,049,652; 5,335,079; 5,307,173.SETUPDiscVideoSet UpManual Clock Setting/ :/ SAT AMMONTH DAY YEAR HOUR MINUTE1 1 12 002000DST TIME ZONEOFF ESTChannel