Panasonic Diga DMR-E95H Operating Instructions Manual

Also see for DMR-E95: Firmware instructions

Contents

16RQT7392RecordingRecording television programs[HDD] [RAM] [DVD-R]≥It is not possible to record to both HDD (Hard Disk Drive) and DVDdrive simultaneously.≥You can record up to 500 titles on HDD, 99 titles on one disc.≥It is not possible to record continuously from one side of a doublesided disc to the other. You will need to eject the disc and turn itover.≥W hen using 8 cm (3″ ) DVD-RAM, remove the disc from the cartridge.≥It is not possible to record CPRM (➡ page 53) protected materialonto DVD-R or 2.8 GB DVD-RAM discs.≥It is not possible to record to a card.PreparationPress [RETURN] to exit the television program list if it is displayed onthe television. To turn off auto start up of the television program list➡ page 23, Selecting the TV Guide On Screen TM system start uppattern.1 Press [HDD] or [DVD] to select therecording drive.The HDD or DVD indicator lights up on the unit.2 If you selected the DVD drivePress [< OPEN/CLOSE] on the mainunit to open the tray and insert a disc.≥Press the button again to close the tray.3 Press [W X CH] to select the channel.To select with the numbered buttons:≥Select the audio to record (➡ page 17).4 Press [REC MODE] to select therecording mode (XP, SP, LP, or EP).≥To record sound using LPCM (XP mode only):Set “Audio for XP Recording” to “LPCM” in the SETUP menu(➡ page 49).5 Press [¥ REC] to start recording.Recording will take place on open space on the HDD or ondisc. Data will not be overwritten.≥You cannot change the channel or recording mode duringrecording.≥You can record while the unit is on standby for timer recording, butonce the time for the timer recording to begin is reached, anyrecording taking place will stop and the timer recording will begin.∫ To stop recordingPress [∫].From the start to the end of the recording is called one title.[HDD]When continuously recording for long durations, titles areautomatically divided every 8 hours.[DVD-R]It takes about 30 seconds for the unit to complete recordingmanagement information after recording finishes.∫ To pause recordingPress [;].Press again to restart recording.(Title is not split into separate titles.)When transferring (dubbing) in high speed mode to DVD-Rafter you have recorded to the HDD.Set “DVD-R High-Speed Recording” to “On” before recording tothe HDD (➡ page 48).However, the following restrictions apply.≥Even 16:9 aspect (Widescreen) programs are recorded in 4:3aspect.≥Even if “Hybrid VBR Resolution” is set to “Automatic”, itchanges to “Fixed” automatically (➡ page 48).When recording to DVD-R≥When recording MTS broadcasts, only the audio selected in“Select MTS” (➡ page 48) is recorded (“Main” or “SAP”).≥In order to play a DVD-R recorded using this unit onanother playback source, the disc must first be finalized(➡ page 45).POWERVOLUMECHINPUT SELECTDVD POWER TVTV/VIDEO1HDD SD/PCDVD2 34 5 67 809CM SKIPAUDIOPAGECHCANCEL VCR Plus+SKIPSTOP PAUSE PLAY/x1.3SLOW/SEARCHFUNCTIONSENTERDIRECT NAVIGATORTOP MENURETURNSUB MENUCHAPTERSETUPInfoPROG/CHECK TV GUIDEREC MODEERASE RECSTATUSTIME SLIPDISPLAYDUBBINGRECTIME SLIP SD PCDVDHDDOPEN/CLOSEDRIVE SELECTPOWERCHTIME SLIPSD CARD PC CARD EJECT/x 1.3AUDIO13 4 2 1ENTERRETURNTIME SLIP345FUNCTIONSSTATUSDIRECTNAVIGATOR1∫;32 ∫ 11 5TIME SLIPNumberedbuttonsTime Slip indicatorHDD, DVD indicatorTV Mode (Airwaves)e.g., 5: [0] ➡ [5]15: [1] ➡ [5]CATV Mode (Cable)e.g., 5: [0] ➡ [0] ➡ [5]15: [0] ➡ [1] ➡ [5]115: [1] ➡ [1] ➡ [5]Insert with the arrow facing in.Insert fully so itclicks into place.Insert label-up.HDDSPCHHDD XPCHRemaining time on the discHDD XPCHREC