59RQT7392ReferenceEdit PageStill pictures1. Damage requiring service—The unit should be serviced by qualified service personnel if:(a) The AC power supply cord or AC adaptor has been damaged; or(b) Objects or liquids have gotten into the unit; or(c) The unit has been exposed to rain; or(d) The unit does not operate normally or exhibits a marked change in performance; or(e) The unit has been dropped or the cabinet damaged.2. Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorizedservicing personnel.3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the samecharacteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.4. Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.For product information or assistance with product operation:Refer to “Customer Services Directory” on page 61.Cannot format. ≥The disc is dirty. Use a special cleaner and wipe clean.≥You tried formatting a disc that is not compatible with this unit.6014Cannot create chapters.Cannot mark the start point orthe end point during “Shorten”operation.≥The unit writes the chapter division information to the disc when you turn it off or remove thedisc. The information is not written if there is an interruption to the power before this.≥These operations are not possible with still pictures.≥You cannot set points if they are too close to each other. You cannot set an end point before astart point.———Cannot erase chapters. ≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter longer. 33The available recording timedoesn’t increase even aftererasing recordings on the disc.≥Available recording space on the DVD-R does not increase even after erasing previouslyrecorded titles.—Cannot create a play list. ≥You cannot select all the chapters at once in a title if the title also includes still pictures. Selectthem individually.—Cannot display DirectNavigator screen.≥This screen cannot be displayed during recording or transfer (dubbing) or while the unit isstanding by for linked timer recording with external equipment.—Cannot edit or format a card. ≥Release the card’s protection setting. (With some cards, the “Write protection Off” messagesometimes appears on the screen even when protection has been set.)44The contents of the cardcannot be read.≥The card format is not compatible with the unit. (The contents on the card may bedamaged.)Format using FAT 12 or FAT 16 with other equipment or format the card with this unit.≥The card contains a folder structure and/or file extensions that are not compatible with thisunit.≥Turn off and then turn on the unit again.15, 284515—Transferring (dubbing),erasing and setting protectiontakes a long time.≥When there are a lot of folders and files, it may sometimes take a few hours.≥When repeating transferring (dubbing) or erasing, it may sometimes take a long time.Format the disc or card.—45The PC card cannot beremoved.≥Make sure the PC card is slotted home firmly before attempting to remove. 28Timer recording began in themiddle of editing a stillpicture.≥If it comes to the time scheduled for timer recording, the recording may start even thoughyou are editing.—Product ServiceProduct information