Panasonic Diga DMR-E95H Operating Instructions Manual

Also see for DMR-E95: Firmware instructions

Contents

41RQT7392Transfer (Dubbing)Recording from a video cassette recordere.g.: Connecting other video equipment to the L2 or DV inputterminals≥Turn off the unit and other video equipment before connecting.If the audio output of the other equipment is monaural, connect to L/MONO.§ The S-VIDEO terminal achieves a more vivid picture than theVIDEO terminal.When recording from the unit’s DV terminalSelect the type of audio recording from “Select Audio CH for DVInput” in the SETUP menu (➡ page 49).[HDD] [RAM] [DVD-R]Preparation≥Connect a video cassette recorder to this unit’s input terminals.≥Press [HDD] or [DVD] to select the recording drive.[Note]When recording using this unit’s input terminals, only the soundreceived at the time of recording will be recorded.As long as secondary audio that is recorded on the video cassette isnot output on the unit in play, it is not recorded.1 While stoppedPress [INPUT SELECT] to select theinput channel for the equipment youhave connected.e.g., If you have connected to L2 input terminals, select “L2”.2 Press [REC MODE] to select therecording mode.3 Start play on the other equipment.4 Press [¥ REC].Recording starts.To skip unwanted partsPress [;] to pause recording. (Press again to restart recording.)To stop recordingPress [∫].To record programs to fill up the remaining space on the disc➡ page 18, Flexible Recording[HDD] [RAM]When the “DV AUTO REC” function is used, programs are recordedas a title while at the same time chapters are created at each breakin the images and the play list is created automatically.Preparation1 Turn off the main unit and DV equipment, then connect theequipment with the unit’s DV input terminal (➡ left).2 Turn on the main unit and DV equipment.3 Pause play of the DV equipment at the point you want recordingto start.4 Press [HDD] or [DVD] to select the recording drive.1 While stoppedPress [FUNCTIONS].2 Press [3, 4, 2, 1] to select “DVAUTO REC” and press [ENTER].3 Press [REC MODE] to select therecording mode.4 Press [2, 1] to select “Rec” andpress [ENTER].Recording starts.When recording finishesThe confirmation screen appears. Press [ENTER] to finish DVautomatic recording.To stop recordingPress [∫].[Note]≥Only one piece of DV equipment (e.g., digital video camcorder) canbe connected to the unit via the DV input terminal.≥It is not possible to operate the unit from the connected DVequipment.≥The DV input on this unit is for use with DV equipment only. (Itcannot be connected to a computer, etc.)≥The DV equipment name may not be shown correctly.≥Depending on the DV equipment, the images or audio may not beinput properly.≥The date and time information on the tape of the DV equipment willnot be recorded.≥You cannot record and play simultaneously.Manual recordingPOWERVOLUMECHINPUT SELECTDVD POWER TVTV/VIDEO1HDD SD/PCDVD2 34 5 67 809CM SKIPAUDIOPAGECHCANCEL VCR Plus+SKIPSTOP PAUSE PLAY/x1.3SLOW/SEARCHFUNCTIONSENTERDIRECT NAVIGATORTOP MENURETURNSUB MENUCHAPTERSETUPInfoPROG/CHECK TV GUIDEREC MODEERASE RECSTATUSTIME SLIPDISPLAYDUBBING3 4 2 1ENTERFUNCTIONSREC MODE¥ RECHDD, DVDINPUT SELECT∫;RECOPEN/CLOSEPOWERCHTIME SLIPSD CARD PC CARD EJECTDV INTIME SLIP SD PCDVDHDD DRIVE SELECT / x1.3L2 S-VIDEO IN VIDEO IN AUDIO IN RL/MONOL/MONO - AUDIO IN - RVIDEO IN DV INS-VIDEO INAudio/VideocableS-Videocable§Other videoequipmentYellow White RedDV Cable(IEEE 1394, 4-pin)This unitAlmost all videos and DVD software on sale have beentreated to prevent illegal copying. Any software that hasbeen so treated cannot be recorded using this unit.DV automatic recording (DV AUTO REC)If the DV automatic recording function does not work properly,check the connections and DV equipment settings, and turn theunit off and back on.If that does not work, follow the instructions for manualrecording (➡ left).