Panasonic Diga DMR-E95H Operating Instructions Manual

Also see for DMR-E95: Firmware instructions

Contents

29RQT7392Playing back[HDD] [RAM] [SD] [PC]1 Press [HDD], [DVD] or [SD/PC] toselect the drive.≥Each time you press [SD/PC]:SD card drive ,". PC card drive≥On the main unit, press[DRIVE SELECT] several times.The indicator lights up on the unit.2 Press [DIRECT NAVIGATOR].3 [HDD] [RAM]Press [3, 4, 2, 1] to select“PICTURE” tab and press [ENTER].4 Press [3, 4, 2, 1] to select the stillpicture and press [ENTER].You can also select still pictures with the numbered buttons.≥Press [2, 1] to display the previous or next still picture.≥Useful functions during still picture play (➡ below).To stop playingPress [∫]To exit the screenPress [DIRECT NAVIGATOR].∫ To show the picture propertiesPress [STATUS] twice.To exit the picture properties screenPress [STATUS].[Note]Still pictures cannot be played during recording.[HDD] [RAM] [SD] [PC]e.g.,5: [0] ➡ [0] ➡ [0] ➡ [5] 115: [0] ➡ [1] ➡ [1] ➡ [5]15: [0] ➡ [0] ➡ [1] ➡ [5] 1115: [1] ➡ [1] ➡ [1] ➡ [5]SD PCDVDHDDe.g., SD card driveDIRECT NAVIGATOR Picture (JPEG) ViewSelectPrevious 001/001 NextSUB MENUENTERSD CARD0001Folder 100__DVD0002 0003 00040005 0006 0007 00080009 ---- ---- ----PICTURE Picture (JPEG) Viewscreen∫ To select the still pictures in another folder(➡ page 15, Structure of folders displayed by this unit)1 Press [3, 4, 2, 1] to select “Folder” and press[ENTER].2 Press [3, 4] to select the folder and press [ENTER].You can also select folders with the numbered buttons.e.g., 5: [0] ➡ [0] ➡[5]15: [0] ➡ [1] ➡ [5]115: [1] ➡ [1] ➡ [5]≥If there is a multiple number of higher folders recognizable,you can switch them using [2, 1].DIRECT NAVIGATOR Picture (JPEG) ViewSD CARD0001Folder 103__DVD0002 0003 00040005 0006 0007 0008PICTURE\DCIM002 101__DVD003 102__DVD---\DCIM\100__DVD---004 103__DVD001 100__DVD002 101__DVD003 102 DVD\DCIM001 100__DVD11 / 10 6:53 PM Folder - Picture No. 102 - 0001Date 11 / 12 / 2003No. 3 / 9Shooting dateUseful functions during still picture playStart Slide ShowSlide IntervalYou can display still pictures one by one with constant interval.While the Picture (JPEG) View screen is displayed1 Press [SUB MENU].2 Press [3, 4] to select “Start Slide Show” and press[ENTER].≥To change the display timing1 Press [3, 4] to select “Slide Interval” in step 2 and press [ENTER].2 Press [2, 1] to select the desired timing (0–30 seconds) and press [ENTER].Rotate 1 Press [SUB MENU].2 Press [3, 4] to select “Rotate RIGHT” or “Rotate LEFT”and press [ENTER].≥Rotation information will not be stored.Zoom inZoom out(Only for a still picture with a lowpixel count)1 Press [SUB MENU].2 Press [3, 4] to select “Zoom in” and press [ENTER].≥To return the picture to its original size, press [3, 4] to select “Zoom out” in step 2and press [ENTER].≥When zooming in, the picture may be cut off.≥The enlargement information will not be stored.Erase 1 Press [ERASE].2 Press [2, 1] to select “Erase” and press [ENTER].≥Once erased, the recorded contents are lost and cannot be restored. Make certain beforeproceeding.Set up ProtectionCancel ProtectionStart Slide ShowSlide IntervalDPOFErase PictureRotate LEFTRotate RIGHTZoom inRotate LEFTRotate RIGHT