Panasonic Diga DMR-E95H Operating Instructions Manual

Also see for DMR-E95: Firmware instructions

Contents

47RQT7392Convenient functionsChanging the unit’s settings1 While stoppedPress [SETUP].2 Press [3, 4] to select the tab andpress [1].3 Press [3, 4] to select the menu andpress [ENTER].4 Press [3, 4] to select the option andpress [ENTER].To exit the screenPress [SETUP].To return to the previous screenPress [RETURN].The settings remain intact even if you switch the unit to standby.§1 You need to set these menus only when you do not use TV Guide On ScreenTM system. These menus turn gray and become un-selectableafter this unit downloads the television program list.§2 You can set these menus only after “Auto Channel Setting” is completed.Continued on next pagePOWERVOLUMECHINPUT SELECTDVD POWER TVTV/VIDEO1HDD SD/PCDVD2 34 5 67 809CM SKIPAUDIOPAGECHCANCEL VCR Plus+SKIPSTOP PAUSE PLAY/x1.3SLOW/SEARCHFUNCTIONSENTERDIRECT NAVIGATORTOP MENURETURNSUB MENUCHAPTERSETUPInfoPROG/CHECK TV GUIDEREC MODEERASE RECSTATUSTIME SLIPDISPLAYDUBBING3,4,2,1ENTERRETURNSETUP¢ CANCELÍ DVD POWERNumberedbuttonsCommon proceduresTabs Menus OptionsAntenna SystemAuto Channel SettingTV GUIDE SettingChannel CaptionsCATVChannelSETUPSet UpSummary of settingsTabs Menus Options (Underlined items are the factory presets.)Channel TV GUIDE SettingSet the TV Guide On Screen TM system.Antenna System§2Select to suit the type of antenna you are using.≥TV ≥CATVAuto Channel Setting§1 (➡ page 50) jPreset Channel Captions§2 (➡ page 51) jManual Channel Captions§2 (➡ page 51) jSet Up Off TimerSelect how long the unit remains on when it is not being used.≥2 hr ≥6 hr ≥OffRemote Control Code (➡ page 13) ≥Set Code 1 ≥Set Code 2 ≥Set Code 3Auto Clock Setting§1 (➡ page 50)Manual Clock Setting§1 (➡ page 11)Time Zone Adjust§1 (➡ page 50) ≥j1 ≥0 ≥i1Re-initialize SettingsThis returns all values in the SETUP menus, except for theclock, channel settings, ratings level, and on-screen language,to the default settings.≥Yes ≥NoDisc LanguagesChoose the language for audio, subtitle and disc menus. [DVD-V]≥Press [ENTER] to show the following settings.≥Some discs start in a certain language despite any changesyou make here.≥Enter a code (➡ page 55) with the numbered buttons whenyou select “Other ¢¢¢¢”.When the selected language is not available on the disc, thedefault language is played. There are discs where you canonly switch the language from the menu screen (➡ page 24).Audio Language ≥English ≥French ≥Spanish≥Original: The original language of each disc will be selected.≥Other ¢¢¢¢Subtitle Language ≥Automatic:If the language selected for “Audio Language” is not available,subtitles of that language will automatically appear if availableon that disc.≥English ≥French ≥Spanish ≥Other ¢¢¢¢Menu Language ≥English ≥French ≥Spanish ≥Other ¢¢¢¢