Panasonic Diga DMR-EX93C Operating Instructions Manual

Contents

2VQT2J40\∫ Batteries≥Insert so the poles (i and j) match those in the remote control.≥Use alkaline or manganese batteries.≥Do not mix old and new batteries.≥Do not use different types at the same time.≥Do not heat or expose to flame.≥Do not leave the battery(ies) in an automobile exposed to directsunlight for a long period of time with doors and windows closed.≥Do not take apart or short circuit.≥Do not attempt to recharge alkaline or manganese batteries.≥Do not use batteries if the covering has been peeled off.Mishandling of batteries can cause electrolyte leakage which candamage items the fluid contacts and may cause a fire.Remove if the remote control is not going to be used for a longperiod of time. Store in a cool, dark place.Remote control operations (> 4)∫ UseThe distance and angles are an approximate.CAUTION!THIS PRODUCT UTILIZES A LASER.USE OF CONTROLS OR ADJUSTMENTS ORPERFORMANCE OF PROCEDURES OTHER THAN THOSESPECIFIED HEREIN MAY RESULT IN HAZARDOUSRADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.REFER SERVICING TO QUALIFIED PERSONNEL.WARNING:TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK ORPRODUCT DAMAGE,≥DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,DRIPPING OR SPLASHING AND THAT NO OBJECTSFILLED WITH LIQUIDS, SUCH AS VASES, SHALL BEPLACED ON THE APPARATUS.≥USE ONLY THE RECOMMENDED ACCESSORIES.≥DO NOT REMOVE THE COVER (OR BACK); THERE ARENO USER SERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.CAUTION!≥DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.ENSURE THE UNIT IS WELL VENTILATED. TO PREVENTRISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TOOVERHEATING, ENSURE THAT CURTAINS AND ANYOTHER MATERIALS DO NOT OBSTRUCT THEVENTILATION VENTS.≥DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGSWITH NEWSPAPERS, TABLECLOTHS, CURTAINS, ANDSIMILAR ITEMS.≥DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH ASLIGHTED CANDLES, ON THE UNIT.≥DISPOSE OF BATTERIES IN AN ENVIRONMENTALLYFRIENDLY MANNER.CAUTIONDanger of explosion if battery is incorrectly replaced. Replaceonly with the same or equivalent type recommended by themanufacturer. Dispose of used batteries according to themanufacturer’s instructions.THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.This product may receive radio interference caused by mobiletelephones during use. If such interference is apparent, pleaseincrease separation between the product and the mobiletelephone.The socket outlet shall be installed near the equipment andeasily accessible.The mains plug of the power supply cord shall remain readilyoperable.To completely disconnect this apparatus from the AC Mains,disconnect the power supply cord plug from AC receptacle.CLASS 1LASER PRODUCT(Inside of product)supplied accessoriesPlease check and identify the supplied accessories.(Product numbers correct as of April 2010. These maybe subject to change.)∏ 1 Remote control(N2QAYB000471)∏ 1 AC mains leadFor use with this unit only. Do not useit with other equipment.Also, do not use cords for otherequipment with this unit.∏ 1 RF coaxial cable∏ 2 Batteriesfor remote controlThe remote control informationGetting startedR6/LR6, AA30203020Remote control signal sensor7 m directly in front of the unit