Panasonic Diga DMR-EX93C Operating Instructions Manual

Contents

21VQT2J40BasicoperationsRecording television programmes [HDD]Refer to “Notes for recording” (> 24) for detailinformation.Preparation≥Turn on the television and select the appropriate AV input to suitthe connections to this unit.≥Turn on this unit.≥Press [DRIVE SELECT] to select the HDD drive.1 Press [W X CH] to select the channel.≥You can also select the channel with the numbered buttons.Press the numbered buttons and press [OK].2 Press [REC MODE] to select therecording mode (XP, SP, LP or EP).≥Recording modes and approximate recording/copying times(> 25)e.g.,3 Press [¥ REC] to start recording.Recording will take place on open space on the HDD. Datawill not be overwritten.≥You cannot change the channel or recording mode duringrecording.≥You can record while the unit is in standby for timerrecording. However, once the time for the timer recording tobegin is reached, any recording taking place will stop andthe timer recording will begin.≥[Analogue] When “Rec for High Speed Copy” is set to “Off”(> 70), you can change the audio being received bypressing [AUDIO] during recording. (This operation does notaffect the audio of the recordings.)∫ To pause recordingPress [;].Press again to restart recording.You can also press [¥ REC] to restart.(Title is not split into separate titles.)∫ To stop recordingPress [∫].≥From the start to the end of the recording is called one title.≥If you have set the “Child Lock” (> 69), the 4-digit PIN entry screenmay appear. Press the numbered buttons to enter your 4-digit PINand press [OK].≥If you record programmes on which “Child Lock” works partially,PIN code entry is required when playing back the recordings.≥When recording a digital radio broadcast or a digital broadcast thatis not being received correctly, the digital channel information(> 19) is also recorded and remains visible during playback.≥If you try to record recording prohibited programmes, “$” isdisplayed in the upper right corner of the screen.If a programme to record has subtitle or multiple audio, you canrecord with subtitle or selected audio.To record with subtitleBefore start recording, press [STTL ] to show the subtitle.If the programme has multiple subtitle, select the desired language(> 19).≥Subtitle cannot be switched after recording.To record with the selected audioBefore start recording, select the desired language for audio (> 19).During recordingPress [¥ REC] on the main unit to selectthe recording time.≥You can specify up to 4 hours later.≥The unit display changes as shown below.≥This does not work during timer recordings (> 22, 29) or whileusing Flexible Recording (> 26).≥This unit is turned to standby mode when this unit is not operatedfor approximately 5 minutes after completing One TouchRecording, if “Auto Standby after OTR” is set to “On” in the Setupmenu. (Default setting: “On”) (> 74)To cancelPress [¥ REC] on the main unit several times until the counterappears.≥The time to stop recording is cancelled; however, recordingcontinues.To stop recordingPress [∫].This function is only for recording on HDD.≥You cannot record TV programmes directly to the disc.Record them on HDD and then copy them to discs. (> 24)“D” means digital broadcasts.TIME SLIPSTTL DISPLAYDIRECT TV RECEXT LINKREC MODECHAPTERREC-10sMANUAL SKIP+60sSTOP PAUSE PLAY/x1.3INPUTSELECT0987654321CHCHPAGESLOW/SEARCHVOLAVDRIVESELECTTVSTATUS EXITOPTION RETURNDELETEOKDIRECTNAVIGATORFUNCTIONMENUGUIDEShowViewPROG/CHECKPAUSE LIVE TVSKIPPAUSESTOPREC MODESTTL0987654321RECAUDIOAUDIOOKCHCHヵユヹヵRECCHNumberedbuttonse.g.XP 32:35SP 65:11LP 130:25EP 260:04Recording ModeRec Mode RemainSELECT≥To record sound usingLPCM (XP mode only):Set the “Audio Mode for XPRecording” to “LPCM” inthe Setup menu (> 71).When recording digital broadcast withsubtitle or multiple audioTo specify a time to stop recording—One Touch RecordingOFF 0:30 ""# OFF 1:00 ""# OFF 1:30 ""# OFF 2:00^" Counter (cancel) ,"" OFF 4:00 ,"" OFF 3:00 ,}RECNote