Panasonic Diga DMR-EX93C Operating Instructions Manual

Contents

75VQT2J40Setting menusOther SettingsYou can configure the remote control TV operation buttons to turnthe television on/off, change the television input mode, select thetelevision channel and change the television volume.1 Point the remote control at thetelevisionWhile pressing [Í TV], enter the codewith the numbered buttons.2 Test by turning on the television andchanging channels.≥Repeat the procedure until you find the code that allowscorrect operation.≥If your television brand is not listed or if the code listed foryour television does not allow control of your television, thisremote control is not compatible with your television.≥If your television brand has more than one code listed, select theone that allows correct operation.Manufacturer and Code No.The HOLD function deactivates all buttons on the unit and remotecontrol. Use it to prevent other people from operating the unit.Press and hold [OK] and[RETURN ]simultaneously until “XHOLD” appears on the unit’s display.If you press a button while the HOLD function is on, “X HOLD”appears on the unit’s display and operation is impossible.To cancel the HOLD functionPress and hold [OK] and [RETURN ] simultaneously until “XHOLD” disappears.Software of CAM (compatible CI Plus) can be upgradedautomatically from broadcasts.Availability of software upgrade is detected while viewing theprogrammes compatible with CI Plus.When notification is displayed on the screen, select “Yes” andpress [OK].≥Notice is not displayed in the following cases:– When recording a programme– When timer recording and CAM software upgrade occursimultaneously– When displaying FUNCTION MENU, DIRECT NAVIGATOR, etc.≥“CAM-UP” is displayed on the unit’s display during upgrading.It is also displayed on the Digital Channel Information (> 19) whenthe CAM software can be upgraded immediately.To execute CAM software upgrade, push the “Red” button while thedigital channel information is displayed, and follow the instructionson the screen.≥Operations such as view, playback, or record cannot be performedwhile upgrading the CAM.Any buttons on the remote control or the unit cannot be used whileupgrading the CAM.≥If the timer recording is started, CAM software upgrade iscancelled to start recording.≥For details, refer to your CAM’s operating instructions or consultyour dealer.Television operatione.g., 01: [0] > [1] 10: [1] > [0]654321CHCHPAGEVOLAVDRIVESELECTÍTVÍCHVOLAVÍTurn TV on/offInput select VolumeChannel SelectNoteAIWA 35 MITSUBISHI 05/19/20/47BEJING 33 NEC 36BENQ 58/59 NOKIA 25/26/27/60/61BRANDT 10/15 OLEVIA 45CENTREX 66 ORION 05CURTIS 05 PHILCO 41/48/64DESMET 05 PHONOLA 05ELEMIS 05 PROVIEW 52FINLUX 61 RADIOLA 05FUJITSU 53 SALORA 26GOLDSTAR 05/50/51 SANSUI 05GRADIENTE 36 SCHNEIDER 05/29/30HIKONA 52 SELECO 05/25INNO HIT 05 SIEMENS 09ITT 25 SONY 08JVC 17/30/39/70 TELEFUNKEN 10/11/12/13/14KOLIN 45 TEX ONDA 52LG 05/50/51 TOSHIBA 16/57MAG 52 YAMAHA 18/41Brand Code Brand Code05LOEWE WHITEWESTINGHOUSE07/46Panasonic 01/02/03/04 METZ 05/28AKAI 27/30 MIVAR 24BEKO 05/71/72/73/74 NOBLEX 33BP 09 NORDMENDE 10BUSH 05 ONWA 30/39/70CHANGHONG 69 PEONY 49/69DAEWOO 64/65 PHILIPS 05/06/46DUAL 05 PIONEER 37/38FERGUSON 10/34 PYE 05FUNAI 32/42/43/65/6863/67 SAMSUNGFISHER 21 SABA 10GOODMANS 05 SANYO 21/54/55/56GRUNDIG 05/69/75/76/77/7809 SEGIRRADIO 30 SINUDYNE 05JINGXING 31/33/66/67/6949 TCLKDS 52 TEVION 52KONKA 62 THOMSON 10/15/44HITACHI 05/22/23/40/41 SHARP 18HOLD functionCI Plus compatible CAM (ConditionalAccess Module) software upgrade1 Das Erste All Channels18:53Change CategoryCAM Upgrade InfoZDF-Mor19:00 - 19:30 NOWTXTNote