Panasonic Diga DMR-EX93C Operating Instructions Manual

Contents

29VQT2J40AdvancedoperationsAdvanced timer recording [HDD]1 Press [PROG/CHECK].2 Press [3, 4] to select “New TimerProgramme” and press [OK].3 Press [2, 1] to move through theitems and change the items with[3, 4].≥When “Channel” is selected, you can press the “Blue” buttonto change the category [e.g., All Channels, TV, Radio,Analogue ([DVB-C]), Favourite (> 67)] and then press[3, 4] to select the channel you want to record.≥Press and hold [3, 4] to alter the Start (Start time) and Stop(Finish time) in 30-minute increments.≥You can also set Channel (Programme position/TV StationName), Date, Start (Start time), and Stop (Finish time) withthe numbered buttons.≥DateTitles recorded using the same daily, weekly or series timerare bundled and displayed as a “group” in theDIRECT NAVIGATOR screen (> 36) except when usingAuto Renewal Recording.≥The recording drive is fixed to HDD.≥You can also press [REC MODE] to change the recordingmode.≥RENEW (Auto Renewal Recording) (> 30)ON!)OFF≥Programme NamePress [2, 1] to select “Programme Name” and press [OK].(> 45, Entering text)≥STTL (Subtitles) (Digital broadcast only)AUTO!)OFFWhen the “Channel” column is set in AV1, AV2 or AV3, thissetting is unavailable.You can also press [STTL ] to switch “STTL” setting.When there are multiple languages, select the subtitle(> 69, DVB Preferred Language).4 Press [OK].The timer programme is stored and the timer icon isdisplayed.“F” lights on the unit’s display to indicate timer recordingstandby has been activated.Repeat steps 2–4 to programme other recordings.Press [Í] to turn the unit off.≥Even when the unit is turned off, you can display the timerrecording list by pressing [PROG/CHECK].Press [PROG/CHECK].A IconsB Message displayed in the “Drive space” lineC Channel name, programme name and otherinformation are displayed.∫ To change a programmePress [3, 4] to select the programme and press [OK]. (> left,step 3)∫ To delete a programmePress [3, 4] to select the programme and press [DELETE ¢].You can also delete a programme with the following steps1 Press [3, 4] to select the programme and press [OPTION].2 Press [3, 4] to select “Delete” and press [OK].∫ To release the unit from recording standbyPress [3, 4] to select the programme and press the “Red”button.≥The timer icon “F” disappears from the timer recording list.≥You cannot cancel timer recording standby mode as long as evenone timer icon “F” remains in the timer recording list.≥Press the “Red” button again to activate timer recording standby.∫ To resolve overlappingPress [3, 4] to select the programme with and press [OK].≥If the “Overlapped Timer Recording” screen appears (> 30)≥If the on-screen instructions do not appear, change or delete theoverlapped programme.∫ To exit the timer recording listPress [PROG/CHECK].≥Programmes that failed to record are deleted from the timerrecording list at 4 a.m. two days later.Manually programming timerrecordings[.lllla.Date: Current date up to one month later minusone day;:Daily timer: SUN-SAT>MON-SAT>MON-FRI;:Weekly timer: SUN>--->SATTimerRecording 30:24 SPHDDRemainModeStopStart DriveNo. Date STTLChannel DrivespaceNew Timer ProgrammeTUE 12.10.10. 12:54:00TimerRecording 30:24 SPHDDRemainModeStop DriveStartChannel Date STTL22:3022:0019. 10. TUE OFF1 Das EProgramme NameSPAll Channels : Das ErsteTUE 12.10.10. 12:54:00HDDNo. ChannelARD01Timer icon0:24 SPModeStop Drive STTLHDDDrivespaceSP OK22:30 OFFogrammeTUE 14.10.09. 12:56:00Check to make sure “OK” isdisplayed (> right).e.g.,Check, change or delete a programme,or resolve overlappingF Timer recording standby is activated.[ This programme is currently recording.Programmes are overlapped. Recording of the programmewith the later start time starts when the earlier programmefinishes recording.You stopped a daily, weekly or series timer recording (> 34).The icon disappears the next time the timer programme startsrecording.The programme was recording prohibited so it was notrecorded.X The programme did not complete recording for some reason.Timer programmes set to Auto Renewal Recording (> 30).HDD Recording drive is set to HDDOK: Displayed if the recording can fit in the remainingspace.> (Date): For recordings made daily or weekly, the display willshow until when recordings can be made (up to amaximum of one month from the present time) basedon the time remaining on HDD.! : It may not be possible to record because:≥there is not enough space left.≥the number of possible titles has reached itsmaximum.≥programmes are overlapped.≥programmes are deactivated.TimerRecording 30:24 SPHDDRemainRETURNOKPress OK to store new programme.Mode STTLStop DriveStartNo. DateChannel DrivespaceNew Timer ProgrammeTUE 12.10.10. 12:54:00Note