Panasonic Diga DMR-EX93C Operating Instructions Manual

Contents

58VQT2J40Copying titles or Playlists (Video)4 When the top menu is displayedPress [3, 4, 2, 1] to select the titleyou want to start copying, and press[OK].While playing in order, all the titles after the selected title arerecorded until the set time. (After the last title on the disc hasfinished playing the top menu is recorded until the set time isreached.)To return to the previous screenPress [RETURN ].To stop copyingPress [∫].You can also press and hold [RETURN ] for 3 seconds to stopcopying.≥If stopped partway, copying will be up to that point.≥The screen on the right is recorded at thebeginning.≥The content is recorded as 1 title from the start ofcopy to the end.≥If play does not begin automatically or if the topmenu does not display automatically, press[1] (PLAY) to start.≥Even if you copy a high quality video/audio DVD, the originalpicture and audio quality cannot be exactly replicated.≥If you want to copy a title from a finalised DVD-RW (DVD VideoRecording format), create a copy list and then copy (> 56,Copying using the copying list–Advanced Copy).Motion pictures encoded in the MPEG2 format, which have beentaken by a Panasonic SD Video Camera, digital video camera etc,can be stored on HDD or DVD-RAM.(All the recordings on the same date become a title.)≥You cannot playback SD Video on an SD card with this unit.You must copy the files to the HDD or a DVD-RAM.≥You cannot playback or record while copying SD Video.≥This unit cannot copy AVCHD format motion pictures from an SDcard.Motion pictures encoded in the MPEG2 format, which have beentaken by a Panasonic digital video camera with HDD etc, can becopied from the camera’s HDD to this unit’s HDD or DVD-RAM.(All the recordings on the same date become a title.)≥You cannot playback SD Video in the camera’s HDD with this unit.You must copy the files to the HDD or a DVD-RAM.≥You cannot playback or record while copying SD Video.Copying Video (MPEG2) from an SDcardThe display below automatically appears when you insert a cardinto the SD card slot while stopped.Press [3, 4] to select “Copy Video ( MPEG2 )” and press [OK].Then go to step 7 on page 56.≥SD Video on an SD card are automatically registered on the copylist.≥If there are no SD Video on an SD card, “Copy Video ( MPEG2 )”is not displayed.My favorite 01/0201Chapter 10305020406Chapter 2Chapter 3 Chapter 4NoteHDDDVD-RAMVIDEO§§ DVD Video Recording formatVideo (MPEG2)SD CardView Pictures ( JPEG )Start SlideshowCopy Video ( MPEG2 )Copy New Pictures ( JPEG )Copying Video (MPEG2) from a videoequipmentPreparation1 Turn on both this unit and the camera.2 Connect the camera to this unit with USB cable.3 Select the appropriate mode that makes the camera ready fordata transfer (such as “PC CONNECT”) on the camera.≥Refer to the camera’s operating instructions for detail.The display automatically appears when you connect the camerato this unit. (> 38)1 Press [3, 4] to select “Video ( DivX & MPEG2 )” and press[OK].2 Press [3, 4] to select “Copy Video ( MPEG2 )” and press[OK].Then go to step 7 on page 56.≥SD Video on the camera are automatically registered on the copylist.≥If there are no SD Video on the camera, “Copy Video ( MPEG2 )”is not displayed.HDDDVD-RAMVIDEO§§DVD Video Recording formatUSB CableVideo (MPEG2)USB devicePlay Video ( DivX )Copy Video ( MPEG2 )