Panasonic Diga DMR-EX93C Operating Instructions Manual

Contents

73VQT2J40Setting menus§ Can be selected when selecting Digital Terrestrial (DVB-T)Channels in Auto Setup(All factory default settings are indicated with underlined text.)AV2 SettingsSet to match the connected equipment.≥Press [OK] to show the following settings.AV2 InputSet to “RGB / Video” or “RGB” when receiving or recording RGBoutput from external equipment.[RGB / Video] [RGB] [Video] [S Video]Ext LinkThis setting cannot be made when the “TV System” is set to“NTSC” (> 72).[Ext Link 1] When a digital satellite receiver which transmits aspecial control signal recordings via the 21-pinScart cable is connected.Start and stop timings of recording are controlledby the control signal.[Ext Link 2] When external equipment with a timer function isconnected.When it turns on, recording starts.When it turns off, recording stops.Active Antenna§[On] Select this when you will use indoor antenna that is notequipped with power supply.[Off]Common InterfaceAccess to software contained on Common Interface (CI) modules.(> 7, 12) Follow the on-screen instructions.OthersRemote ControlChange the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonic productsclose together.[DVD 1] [DVD 2] [DVD 3]Use “DVD 1”, the factory set code, under normal circumstances.1 Press [3, 4] to select the code (“DVD 1”, “DVD 2” or “DVD 3”)and press [OK].To change the code on the remote control2 While pressing [OK], press and hold the numbered button([1], [2] or [3]) for more than 5 seconds.3 Press [OK].∫ When the following indicator appears on theunit’s displayThe unit’s remote control codeChange the code on the remotecontrol to match the main unit’s(> step 2).Executing “Shipping Condition” in the Setup menu returns the mainunit code to “DVD 1”. Change the remote control code to 1(> step 2).SetupTuningRemote ControlPress “” and “OK” togetherfor more than 5 seconds on the remotecontrol.DiscPictureNoteClockThis unit usually obtains time and date information from digitalbroadcasts and automatically corrects the time several times aday. However, if the time is not set correctly, use the settings listedin the method below.1 Press [3, 4] to select “Off” of “Automatic” and press [OK].2 Press [2, 1] to select the item you want to change.The items change as follows:Hour!#Minute!#Second!#Day!#Month!#Year^-----------------------------------------------------------------------------------------J3 Press [3, 4] to change the setting.You can also use the numbered buttons for setting.4 Press [OK] when you have finished the settings.The clock starts.If a TV station transmits a time setting signal, and when“Automatic” in the Clock setting menu is set to “On”, the automatictime correction function checks the time and if necessary it isadjusted several times every day.Standby Settings≥Press [OK] to show the following settings.Power Save in Standby[On] It will go into the Power Save in Standby modewhen the unit is in standby mode.[Off] It is possible to start quickly from the standbymode. (Quick Start mode)[On Timer] “Power Save in Standby” is set to activateduring the setting time period. (> below)1 Press [3, 4] to select “On Timer” and press [OK].2 Press [3, 4] to set the start time (hour).3 Press [2, 1] to select the stop time and press [3, 4] toset the stop time (hour).4 Press [OK] when you have finished the settings.≥You can also use the numbered buttons for setting.≥You can set start and stop time by the hour.≥If the clock has not been set, “Power Save in Standby” isactivated at all hours.ClockAutomaticTime DatePlease set clock manually.OK: store RETURN: leaveOK RETURNSELECTCHANGEOff0 : 00 : 00 1 . 1 . 20100 9Numbere.g., This screen appearswhile receiving a digitalbroadcast.NotePower Save in StandbyPower Save On TimerTo 6 :00From 0 :00Saves standby power consumptionby disabling Quick Start function andAV2 loop-through in standby. Unit's Displayis set to "Automatic".Press OK to manually set the period ofPower Save.0 9NumberOK RETURNSELECTCHANGE