76VQT2J40Additional connectionsReference≥Connect to terminals of the same colour.≥Connect to terminals of the same colour.≥To enjoy multi-channel surround sound DVD-Video, connect anamplifier with Dolby Digital, DTS and MPEG decoders.“Digital Audio Output” in the Setup menu (> 71)≥When this unit is connected to an amplifier with an optical digitalaudio cable and connected to a television with an HDMI cable, youcan enjoy the highest quality of audio from the disc by setting“Digital Audio Output” to “Optical Only” in the Setup menu (> 72).In this case audio is only output from the amplifier not thetelevision.≥Before purchasing an optical digital audio cable (not supplied),check the terminal shape of the connected equipment.≥You cannot use DTS Digital Surround decoders not suited to DVD.≥Connect to terminals of the same colour.Connecting a television with AUDIO/VIDEOConnecting a VCR with AUDIO/VIDEORFINRFOUTLAUDIOVIDEOLROUTAUDIO INR L VIDEOINThis unit’s rear panelAudio/Video cableTelevision’s rear panelR LAUDIO OUT VIDEOOUTThis unit’s front panelAudio/Video cableVCR’s rear panelConnecting an amplifier with a digitalinput terminalConnecting a stereo amplifierRequired settingAV OUTAV OUTDIGITAL AUDIO OUTDIGITAL AUDIO OUT(PCPCM/M/BITSTREAMBITSTREAM)OPTICALMON INTERFACEMON INTERFACECOMMON INTERFACEOPTICAL INOptical digital audiocableDo not bend sharplywhen connecting.This unit’s rear panelInsert fully, withthis side facingup.Amplifier’s rear panelRFINRFOUTAUDIOVIDEOLROUTAUDIO INR LAudio cableThis unit’s rear panelAmplifier’s rear panel
