Panasonic Diga DMR-EZ48VEB Operating Instructions Manual

Contents

19RQT9126Confi rm the programme (start and end time) by TVmagazine, etc. and correct ifnecessary using , , , ,then OK– The settings are stored and the timer programmeis on.– The timer icon is displayed.– “” lights on the unit’s display to indicate timer recording standby has been activated.– Repeat steps – to programme other recordings.– Press [/l] to turn the unit off.Preparation: Turn on the television and select the appropriate video input to suit theconnections to this unit. Turn on this unit. Insert a disc or video cassette that you use for recording (¼ 73, 74). [RAM] If the disc is protected, release protection (¼ 60). [VHS] Ensure accidental erasure tab is intact. Confirm that the clock on the unit’s display is set to the correct time.,  ,  to select the future programme, then OKLandscapeTV Guide: CategoryAll ServicesAll TypesProg. TypeSELECT TIMER RECRETURN Guide Change Display Mode PagePage+24 Hr Prog. Type CategoryTime:infoBBC 1BBC 2Thu 21/02/08 19:45Holiday ProgrammeWed 13thTimerRecording RemainTHU 21/02/08 19:45:16RETURNOKMode STTLStopStartNameName Date Drive21:4020:3013/ 1 WED SP OFFDVD3 BBCProgramme NamePress OK to store the programme. DELETEChannel 4Channel 510314570Number--0 9-24 Hr1:58 SPDVD--:----VHSAll Services : BBC 2Holiday Programme(Guide Link)STATUAA SCREATAA ECHAPTERFUNCTIONMENUDIRECTNAVAIGATAAORGUIDERETURNPLAYPAPP USESTOPSLOW/SEARCHCHSELECTINPUT0987654321CHAVAATVDRIVESELECTDVD/VHSVOLDELETE MANUAL SKIPPROG/CHECKEXITOKOPTIONTRACKING/V-LOCK/PAGESKIP/INDEXRESETREW FFRefer to “TV Guide” (¼ 34) and “Advanced Timer Recording” (¼ 30) fordetail information on TV Guide.[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]Notes The TV Guide list is not displayedimmediately after purchasing this unit. The TV Guide system will not work ifthe clock is not set correctly. If “NTSC” has been selected for “TVSystem” (¼ 67), the TV Guide systemcannot be used. “FR” recording mode is not availablewhen the timer programme is controlledby “Guide Link”. Simultaneous recording to both DVDand VHS is not possible.Tips [RAM] [-RW‹V›] [+R] [+R]DL] [+RW]To use a new disc, formatting isnecessary.To check programmes (¼ 32)To cancel a timer recordingprogramming1.Press [, , , ] to select theprogramme (the timer icon is displayed)and press [OK].– Confi rmation screen appears.2.Press [] to select “Yes” and press[OK].– The timer icon disappears.GUIDE– The TV Guide list appears.yTimer iconTimer RecordingBasic OperationsWhat is Freeview built-in?Freeview built-in is a function that enables timer recordings to be controlled by the signalsent from the broadcaster. “Guide Link” is available.“Guide Link” — If you set a timer recording from the TV Guide, recording start and stoptimes can be controlled by the broadcaster, e.g., delayed recording start time.This is indicated by “Guide Link” in the Timer Recording screen in step  (¼ below).If you set a timer recording from the TV Guide, the recording’s start and stop times arecontrolled by the signal sent from the broadcaster. If the signal is not sent correctly,the recording may lack the beginning or the ending part of the programmes.In order to make the timer recording work successfully, we recommend you set thestart time earlier and the end time later by some minutes, up to a maximum of 10minutes for Guide Link to function.e.g. When you set the timer recording for a programme that will start at 10:00 andend at 11:00, set “9:58” and “11:05” in step  (¼ below).“Guide Link” will not be displayed and will not function under the following conditions.– Timer programmes set manually (¼ 30).– Timer programmes set from the TV Guide are modified or start/stop time changed bymore than 10 minutes from original time.“Guide Link” is displayed here.