75RQT9126Unit CareReferenceThe precision parts in this unit are readily affected by theenvironment, especially temperature, humidity, and dust.Cigarette smoke also can cause malfunction or breakdown.MaintenanceTo clean this unit,Wipe with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically treated cloth, carefully read the instructionsthat came with the cloth.To clean the DVD lensDust and dirt may adhere to the unit’s lens over time, making itimpossible to record or play discs.Use the DVD lens cleaner about once every year, depending onfrequency of use and the operating environment. Carefully read thelens cleaner’s instructions before use.DVD lens cleaner: RP-CL720ESelect a position with good ventilation when installing the unit. Donot block the cooling fan on the rear of the unit.Cautions about condensationCondensation can cause unreliable playback of VHS recordings.Condensation may form in the following cases, The unit is brought from cold surroundings into a well-heated room. The unit is suddenly brought from cool surroundings, such as an air-conditioned room or car, to a place which is hot and humid. During rainy seasons.In any of the above-mentioned conditions, do not operate the unit for atleast 2 hours. The unit is not equipped with a moisture sensor.The manufacturer accepts no responsibility and offers no compensation for loss of recorded or editedmaterial due to a problem with the unit or recordable media, and accepts no responsibility and offers nocompensation for any subsequent damage caused by such loss.Examples of causes of such losses are A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company. A disc used as described above and then played again in this unit. A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.DO NOT Do not place the unit on amplifi ersor equipment that may become hot.The heat can damage the unit. The unit should not be installed oroperated near large magnets orelectromagnetic devices. Suchdevices can damage pre-recordedVHS recordings. Do not place any heavy objects on top of the unit. The unit should not be mounted in a vertical position. It’s designedto operate in the horizontal position.Before moving the unit, ensure the disc tray and cassettecompartment are empty.Failure to do so will risk severely damaging the disc and the unit.To clean the video headsDirt on the video heads can cause poor recording and play.If the picture does not improve, use an optional head-cleaning cassette.If the problem persists, seek advice from a qualifi ed service person.Head-cleaning cassette: NV-TCL30PTSome optional accessories may not be available in some countries.