31RQT9126To cancel a timer recording in progressSTOP– Confi rmation screen appears. to select “Stop Recording”,then OKNotes Recording stops and the timer programme is deleted. (Daily andweekly timer programmes remain and timer recording will startfrom the next time the timer recording is set.)PROG/CHECK– See “Timer Recording screen icons” (¼ 32)for explanation of icons displayed., to select the programme.To deactivate timer programme(e.g. to interrupt a daily or weekly timerprogramming)Notes on timer recording When a timer recording is set, DVDs that were recorded usinga different TV system cannot be played unless the TV system ischanged in the Setup Menu (¼ 67) or the timer recording hascompleted or has been cancelled. Timer recordings are activated regardless of whether the unit isturned on/off. Timer recordings begin when the set time is reached even whenplaying. Timer recordings do not begin while editing or copying. If the unit is turned on when timer recording begins, itremains turned on after recording fi nishes. It does not turn offautomatically. You can turn the unit off during timer recording. If the unit is not put in the timer recording standby mode at least10 minutes before the programmed timer recording starting time,the “” fl ashes on the unit’s display. When you programme successive timer recordings to startimmediately one after the other, the unit cannot record the part atthe beginning of the later programmes.ProgrammeProgrammeRecordedRecordedNot recorded– “” (¼ 32) disappears from the timerrecording list.– Press the “Red” button again to activate timerprogramme.(Red)Advanced FeaturesAdvanced FeaturesTipsYou can deactivate the timer programme in the followingprocedure as well.Perform steps - (¼ above)1. Press [OPTION]2. Press [, ] to select “Timer Off”, then press [OK].While the unit is onDRIVESELECT to select the drive.